MK3 cluster into MK2 (TD) - Upgrades (non engine related ) - VWDiesel.net The IDI, TDI, and mTDI source.

• MK3 cluster into MK2 (TD) by X@V on 10 Aug, 2006 17:35
• I have a MK3 wiring hardness with too much things on it (cruise control, A/C, alarm, etc.)
  
  I need to know how the MK3 cluster could work on a MK2 wiring hardness. It's missing the VSS (3 wires). It's still not working!
  
  What's missing?
• #1 by RabbitJockey on 15 Aug, 2006 19:01
• it should work
• #2 by X@V on 15 Aug, 2006 19:03
• A wire between E2 to D8 and it works.  :wink:
  
  I installed the MK3 coolong system on the MK2 wiring. It's simple!
• #3 by X@V on 03 Jul, 2007 18:54
• I have trouble
  
  I have only 9V at the E2 to D8 junction.
  
  When I turn the ignition switch on, the display disappear and the cluster doesn't work. The glow plugs indicator works but not the rest.
  
  Do you have an idea?
• #4 by burn_your_money on 03 Jul, 2007 19:48
• That's a common problem with the mk3 clusters. Try pulling up on the handbrake and seeing if the cluster works
• #5 by somolovitch3 on 08 Jul, 2007 06:33
• If that works, means there is a lack of/poor grounding at the cluster, no?