Author Topic: MK3 cluster into MK2 (TD) (Read 4070 times)

X@V · « **on:** August 10, 2006, 08:35:09 pm »

I have a MK3 wiring hardness with too much things on it (cruise control, A/C, alarm, etc.)

I need to know how the MK3 cluster could work on a MK2 wiring hardness. It's missing the VSS (3 wires). It's still not working!

What's missing?

RabbitJockey · « **Reply #1 on:** August 15, 2006, 10:01:41 pm »

it should work

X@V · « **Reply #2 on:** August 15, 2006, 10:03:55 pm »

A wire between E2 to D8 and it works. :wink:

I installed the MK3 coolong system on the MK2 wiring. It's simple!

X@V · « **Reply #3 on:** July 03, 2007, 09:54:03 pm »

I have trouble

I have only 9V at the E2 to D8 junction.

When I turn the ignition switch on, the display disappear and the cluster doesn't work. The glow plugs indicator works but not the rest.

Do you have an idea?

burn_your_money · « **Reply #4 on:** July 03, 2007, 10:48:50 pm »

That's a common problem with the mk3 clusters. Try pulling up on the handbrake and seeing if the cluster works

somolovitch3 · « **Reply #5 on:** July 08, 2007, 09:33:09 am »

If that works, means there is a lack of/poor grounding at the cluster, no?