the Centre caps are missing so I used the ones from my castellets
Sent from my iPhone using Tapatalk
They suit the car and look good imo with the black paint
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I changed the wheels again to the pirelli p slots but as they are 14” wheels I had to change the g60 brakes I had already fitted as 15” wheels are the minimum that will fit over g60 brakes.So I fitted calipers and carriers from an Opel Vectra after I refurbished the calipers and fitted new seals . The opel brakes just need a sleeve on the caliper carriers so the smaller diameter v.w bolt fits.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I bought some coil overs too so while I had the brakes off I I decided to clean up the wishbones and overhaul the front suspension
Sent from my iPhone using Tapatalk
wishbones all cleaned up and new ball joints fitted
Sent from my iPhone using Tapatalk
Cheers Dennis,
Also fitted new bump stops.
Sent from my iPhone using Tapatalk
new discs and pads too
Sent from my iPhone using Tapatalk
Fitted Goodridge braided hoses all round for assured braking along with 9” servo and 22m.m master cylinder
Sent from my iPhone using Tapatalk
I also got some of these to cope with the weight of the stainless exhaust
Sent from my iPhone using Tapatalk