Trying to get rid of my Holset as I want to go a different route. Turbo worked excellently in my 1.9TDI Caddy, easily hits 20-30psi but I want more power on the lower end so going smaller.
Turbo is genuine and is bolted up to a T3 manifold with a T25 adapter I have since had the adapter and manifold welded for extra security. I ran the turbo for less than a couple hundred miles and I bought it new off eBay. Believe it’s a 6cm exhaust housing I never checked and I have to unbolt it to figure it out. I made the bracket by hand for the wastegate and I’ve had no issues with it. As the turbo had to be clocked to work on our cars.
I can include the blanket, exhaust flange, filter, etc for more we can work something out. I think I even have an extra set of vband clamps if needed.
Truck ran 90mph in the quarter mile with this turbo at 15psi and broken 020 tranny fwiw.
$550 for just the turbo and the manifold.
Sent from my iPhone using Tapatalk