Author Topic: adjusting for more boost (Read 3093 times)

zagarus · « **on:** June 19, 2006, 09:25:28 pm »

is there a way to adjust something either on the blow off valve, or somewhere else in order to gain a few psi of boost, im sure by pinching the wastegate you can, but i dont wanna do that. Ill be getting a boost controller next month but in the meantime can i do something else for a little extra boost?

hillfolk'r · « **Reply #1 on:** June 19, 2006, 11:03:02 pm »

what kind of boost controller are you getting? i have used shop air regulators for boost controllers for years,and ya can get them at home depot for like 15 bux

zagarus · « **Reply #2 on:** June 20, 2006, 01:55:18 am »

i was gonna get the manual boost controller from concept1, kinetic motorsports i believe is the company. I was gonna pick it up next month when i goto calgary.

jtanguay · « **Reply #3 on:** June 20, 2006, 02:02:30 am »

all you really need is a valve that bleeds off some of the pressure. or a pressure regulator valve from home depot... is there really any kind of benefit of paying more for a fancy one?

zagarus · « **Reply #4 on:** June 20, 2006, 02:14:35 am »

wanna tell me exactly what i should get from home depot? i dont need the fancy stuff, but something that does what i need properly and safely. nothing to ghetto. wouldn't mind getting what i need tomorrow. and is it easy to install myself?

Benjamin · « **Reply #5 on:** June 20, 2006, 12:27:17 pm »

Wich boost controllers do give less lag? an wich not?

Greetz, Benjamin

klr650@ · « **Reply #6 on:** July 10, 2006, 11:58:30 pm »

Would this work from Home Depot?

Internet # 169688