Author Topic: 100m tranny in 90mm car (Read 3738 times)

sethyboy85 · « **on:** June 06, 2006, 10:07:56 pm »

okay, i am getting a 100m flange tranny ACN for highway driving.. I also want to install a 80% shim kit so I have to make hybrid axles, I have read about them before but can't find the information now.

anybody got links or comments (greatly appreciated) on my idea?
Thanks
Seth

dubCanuck1 · « **Reply #1 on:** June 06, 2006, 11:17:13 pm »

What are you trying to accomplish? Why don't you just get some 100 mm CV's or a set of 100mm driveaxles?

sethyboy85 · « **Reply #2 on:** June 06, 2006, 11:30:07 pm »

the axles are only 10-15k miles old, is the outer cv the same size on 100m to 90m? if so I might just go out and buy new ones

dubCanuck1 · « **Reply #3 on:** June 06, 2006, 11:32:51 pm »

If they're made for the same body type, they'll be the same size. Just the inners change.

sethyboy85 · « **Reply #4 on:** June 06, 2006, 11:39:48 pm »

okay thanks

hillfolk'r · « **Reply #5 on:** June 08, 2006, 09:22:51 pm »

just so you guys know,and i called peloquin about it(their site says to call about install info using 90mm's)
they said you CAN use a 80% kit with 90mm flanges,as long as the car isnt lowered,or lowered more than maybe 1 inch max
im runnin it like that+its nice so far.....

sethyboy85 · « **Reply #6 on:** June 09, 2006, 11:04:20 pm »

Im dropped about 2+ inches...