Author Topic: um im thinkin yes to this (Read 47956 times)

hillfolk'r · « **on:** May 30, 2006, 11:12:47 pm »

im thinkin on goin with a holset hy35 (8cm exhaust hsng) on the tdi...its reasonable dough......go big or go home? good idea yes/no?

oh also, its in centerburg, i know a few diesel guys are near there.where ya' at??i could stop by for a smoke :lol:

lord_verminaard · « **Reply #1 on:** May 31, 2006, 08:53:25 am »

Centerburg Ohio? Just down the road from here!

Hit me up if you get it, I'll help you drool on it.

Brendan
84 Scirocco 8v
00 Camaro L36 M49

hillfolk'r · « **Reply #2 on:** May 31, 2006, 07:33:15 pm »

hopefully i can get a hold of the guy and get down there this weekend....think itll make the tdi-m a runnin fool?

?

hillfolk'r · « **Reply #3 on:** May 31, 2006, 08:45:00 pm »

ijust talked to the turbo guy,,im gonna be in centerburg by 11 am this saturday
then im clear for some vw shenanigans,lord
then we can drool on it

DVST8R · « **Reply #4 on:** May 31, 2006, 08:52:30 pm »

DO IT. I have never seen an 8cm exhaust housing normally I think the hy's are like a 9cm, I would look for even a smaller one like a 6cm housing as you are just running a single, if your turbo guy doesnt have a line on them give Piers a call or Garmon.

I have been pushing the Hy/Hx-35 for like 2years now, and people are just starting to catch on, but at least they are

.

Post up when you get it.

hillfolk'r · « **Reply #5 on:** May 31, 2006, 10:17:47 pm »

i think the printout rabbittree gave me said 8.5 they make a 6??wow,well maybe someday if i had the $$ for that 6cm,but for now,it kinda hasta work,ihope :? :? :roll: :?: ,at this point i figure i aint really worried about lag,etc,
it is already on strong(boost) at 2000 rpms now,so big deal if it doesnt come on till a little later,,as long as it kicks the stock turbos butt when it chimes in :twisted:im an amatuer at reading a turbo map,can someone look at the 2 and compare?

andy2 · « **Reply #6 on:** May 31, 2006, 10:22:39 pm »

This is the 9cm hy35 from the dodge 2000-02 auto trans :wink:

hillfolk'r · « **Reply #7 on:** May 31, 2006, 10:33:14 pm »

custom manifold by:
http://westmotorsports.biz/
the main dude used to be a vw tech in the mid-late 80s ,i drool at his stories

hillfolk'r · « **Reply #8 on:** May 31, 2006, 10:37:58 pm »

hows that thing run andy2???looks like a beast big thumbs up :twisted: :twisted: :twisted: oh,ilooked at the big pic,do you have it goin yet???man,thats gonna be wicked,ohgreat,,now look at what you did,should i stage it??,not yet ,i just wanna get the swap done before waterfest,so down the road,maybe
:twisted: :twisted: it never ends,it just gets smokier

andy2 · « **Reply #9 on:** May 31, 2006, 10:44:22 pm »

I actually just heard the engine run for the first time only an hour ago

.Starts right up no smoke at idle (18-19:1 CR),sounds great.Theres just enough to make the hy spin at idle :twisted:.

hillfolk'r · « **Reply #10 on:** June 03, 2006, 08:44:07 am »

lord verminnard,you are gonna miss out,cause im comin your way in a few hours :cry: ,im leavin in about 20 mins :wink: maybe next time :cry:

hillfolk'r · « **Reply #11 on:** June 04, 2006, 02:23:11 pm »

here ya go,thats my stock blown up garrett on the left

Benjamin · « **Reply #12 on:** June 04, 2006, 03:04:30 pm »

how can this thing spool up? :shock:

Greetz, Benjamin

hillfolk'r · « **Reply #13 on:** June 04, 2006, 11:01:10 pm »

that exhaust side is actually pretty small,,ill have to get more pics :wink:

DVST8R · « **Reply #14 on:** June 05, 2006, 01:50:26 am »

Rock out with your "Holset" out!