i`m not greedy i just need a little more..........boost

[ssray]

Having just done the max fuel screw thing and liking it i`d like moore boost please but i dont know what turbo i have my engine is a 1993 seat 1.9td aaz, there is no threaded bit to the wastegate so that discounts that and the link in the more power for your 1.9 is dead.
cheers  Ray :lol:

[ssray]

anyone??

[Benjamin]

Install a bleed valve.

I THINK you got a K14 ore a T2.
correct me if i'm wrong pls

Greetz, Benjamin

[ssray]

Cheers Benjamin, i have plans for one of those http://transportation.hackaday.com/entry/1234000267047266/
will do.
Ray :oops:

[Benjamin]

were are you from???

you can buy it for about 25-50€.
try ebay.

Greetz, Benjamin

EDIT:



http://cgi.benl.ebay.be/JRD-Boost-Controller-XR6-Starlet-diesel-turbo_W0QQitemZ4643659845QQcategoryZ43808QQrdZ1QQcmdZViewItem

QUICKER ACTING BALL & SPRING MECHANISM FOR FASTER TURBO SPOOL!!!!!!!!!!! WAIT TILL YOU FIT ONE

my brother got a uno turbo gasser, he installed a kind of bleed valve on it, and his turbopressure exaly realy spool up much quicker, any idea how this works??

Greetz, Benjamin

[745 turbogreasel]

I did a ball and spring controler.
Now I hit 11 PSI aby 2400 RPM instead of 3200.

from 2800 up, I am 14.7, where I used to max at 11.

My 'saffety falve' still works, I just threaded the screw in so It doesn't open till 15.  I am not gonna turn it up any more untill Ihave my IC installed.

the car is even more enjoyable to drive without the 'hole' after each upshift.

I had to seriously port the valve to get it to work with the 2 hose WG actuator I have.  Initialy it would take off like a rocket, then pop the safety valve around 4000 RPM, even with the valve set to open at 7 PSI.

[ssray]

Benjamin
i`m in the uk just north of london, i could e-bay it ......but is that not less fun??
cheers Ray