-
Question - what pumps are you guys running on mechanical TDI
by
Cynical 1
on 15 May, 2006 16:28
-
I've searched, read the FAQ's, and followed quite a few posts. but haven't found many things in common, or many descriptions...
What injection pumps are you running on your mechanical TDI conversions?
I've seen a cummins, 1.9TD, 1.6TD, hybrid this and that, but no real "this is what it is and what it is from" listings...
I'm wanting to do a M-TDI, and I'm trying to source a pump. I would like to know what works.
I would like the:
Bosch part number
Manufacturer part number (if known)
application (what it originally came from)
Hybrid- what part of what onto what to make it work.
Thank you.
Perhaps this should be a FAQ topic???
-
#1
by
Cynical 1
on 22 May, 2006 13:26
-
Ok.
So, nobody wants to help out, or prevent this question from being asked again by other newbies???
-
#2
by
vwmike
on 22 May, 2006 13:35
-
There are various ways to get this done but probably one of the simplest would be to use a 1.9TD (AAZ) pump as a base as the input shaft and offset should be correct (as far as I know). Install the TDI camplate and pump head (manuals were 10mm, automatics were 11mm) onto the AAZ pump, slap a 1.6TD LDA pin and lid on top and modify the governor to meet your needs.
-
#3
by
macsdub
on 25 May, 2006 09:30
-
sorry man,im in germany,its hillfolkr here,,,
im using an 84 1.6td pump,with a 12mm head from a cummins(mid 80s) pump,i can run low 14's with a stock governor
-
#4
by
therabbittree
on 26 May, 2006 05:49
-
yo blake let me know if you grab one of those 1.4's or 1.2's... i am looking for the 150hp 5cyl tid fro aeurovan with teh 6spd trans and wiring cluster etc..let me knwo I emailed the guy you are dealing with..later have frun take soem brochures back..hehe
deo
-
#5
by
Tintin
on 26 May, 2006 17:43
-
Hy, A question for fine tuning about a mechanical pump for the TDI, the advance timing, Which spring and timing piston are best to have a linear curve of timing?
-
#6
by
macsdub
on 27 May, 2006 04:25
-
we are back dude,we didnt get one yet,but its still in the works...........ill be 'round today,rabbittree