S-PAutomotive.com
« previous next »
Pages: [1]

Author Topic: Rings  (Read 2411 times)

April 26, 2006, 10:11:56 pm

X@V

  • Veteran
  • Offline
  • ***
  • 1002
Rings
« on: April 26, 2006, 10:11:56 pm »
After the bad compression test results, I decided to check my engine.

Everythings seems to be OK but I had 400PSI on two cylinders.

I would like to change the rings but I need to know which rings are good for a 1.9L TD? How much? Where?

Thanks
Logged


Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!
Reply #1April 26, 2006, 10:20:15 pm

SMOKEYDUB

  • Veteran
  • Offline
  • ***
  • 630
Rings
« Reply #1 on: April 26, 2006, 10:20:15 pm »
just changing rings wont do a hole lot you would have to deglaze the bore to get any good results.
Logged
12mm PUMP 'O' DEATH on a 1.6L
(courtesy of GILES)

2000 NISSAN XTERRA (5 SPD)
1990 VW JETTA 20 VALVE DRAG CAR
1984 RABBIT TD 2dr (SOLD)
1.8t AEB soon around 550 whp
Reply #2April 26, 2006, 10:29:07 pm

X@V

  • Veteran
  • Offline
  • ***
  • 1002
Rings
« Reply #2 on: April 26, 2006, 10:29:07 pm »
Yes I will do.

I have everythings to do it.
Logged
Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!
Reply #3April 26, 2006, 11:40:11 pm

hillfolk'r

  • Veteran
  • Offline
  • ***
  • 1532
Rings
« Reply #3 on: April 26, 2006, 11:40:11 pm »
http://www.vwdiesel.net/phpBB/viewtopic.php?t=3799
here ya go,,isnt 1.9 idi same rings as tdi???either way they can make them up for you
Logged
Throttle cables ftw
Reply #4April 26, 2006, 11:43:51 pm

X@V

  • Veteran
  • Offline
  • ***
  • 1002
Rings
« Reply #4 on: April 26, 2006, 11:43:51 pm »
Very interested...  :wink:

The ring set if for a 1.9L TDI?

PM me if you can ship them  :wink:
Logged
Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!
Reply #5April 26, 2006, 11:46:24 pm

wyldman

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 403
Rings
« Reply #5 on: April 26, 2006, 11:46:24 pm »
OEM rings are $39.00 a hole,or $156 a set.I can ship them to you if need them.
Logged
Auto Proformance Services - VW Diesel parts and service
(416)565-7282
Reply #6April 27, 2006, 08:17:06 pm

935racer

  • Guest
Rings
« Reply #6 on: April 27, 2006, 08:17:06 pm »
I sell the oem goetze onces for $28CAD a hole. I can ship as well.
Logged
Reply #7April 27, 2006, 10:48:34 pm

X@V

  • Veteran
  • Offline
  • ***
  • 1002
Rings
« Reply #7 on: April 27, 2006, 10:48:34 pm »
OK, OEM are good for my application.

That's what I will buy.

Thanks  :wink:
Logged
Jetta MK3 coupe: new project, 2.0 16V TDI BKD, R1287, ARL conn rods, GTB2260VK, FMIC, etc... (build-up very soon)

Be patient with me, english is not my first language!
Pages: [1]
« previous next »