Author Topic: FN tranny work in my A2? (Read 5392 times)

sethyboy85 · « **on:** April 23, 2006, 08:02:43 pm »

I am experiencing some delays in my motor swap which have left me pondering some parts of it, one of them being I am switching whatever the heck is in the car now out for a FN tranny with my new motor as well, will the linkage line up and work correctly?

RabbitJockey · « **Reply #1 on:** April 24, 2006, 03:46:28 pm »

the only thing that might be different is the reverse switch

sethyboy85 · « **Reply #2 on:** April 24, 2006, 04:23:32 pm »

I can live with that.

greggearhead · « **Reply #3 on:** April 25, 2006, 10:24:14 am »

Actually, the FN will likely be missing the bosses for the rear mount on the diff housing. You might be able to fab something, but it won't be a bolt in. Some A1 transmissions have both style mounts, some don't.

sethyboy85 · « **Reply #4 on:** April 25, 2006, 03:03:07 pm »

I have a spot it looks like to mount a bobble type strut to on the bottom of the diff case or some sort of mount goes through it and then tightened down, also have 2 tabs on the driver side of the diff looks like what I have in the car now and the other mountint spot looks to be the same.