« previous next »
Pages: [1]

Author Topic: where's a good place to buy injector inserts?  (Read 4204 times)

June 01, 2018, 01:45:52 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
where's a good place to buy injector inserts?
« on: June 01, 2018, 01:45:52 pm »
  i'm looking for some new injector inserts for a 1.6.
 Haven't shopped for them in awhile but my stock pile is used up.
Anyone shopped for them recently?
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #1June 02, 2018, 04:47:33 pm

ToddA1

  • Veteran
  • Offline
  • ***
  • 434
Re: where's a good place to buy injector inserts?
« Reply #1 on: June 02, 2018, 04:47:33 pm »
What are inserts?  Are we talking about nozzles?

-Todd
Logged
Reply #2June 02, 2018, 10:40:51 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: where's a good place to buy injector inserts?
« Reply #2 on: June 02, 2018, 10:40:51 pm »
If he tells you....he will have to kill you.........
If he is looking for nozzles....there is this super-secret organization....known as.......EBAY! (But, don't tell anyone....because, you know what happens then....) (fingers across neck).
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #3June 02, 2018, 10:58:56 pm

rabbid79

  • Veteran
  • Offline
  • ***
  • 684
Re: where's a good place to buy injector inserts?
« Reply #3 on: June 02, 2018, 10:58:56 pm »
Or perhaps he's talking about swirl chambers?
Logged
'15 WRX
Parts for 2.0 TD build - Now looking for suitable car to put it in.
Reply #4June 03, 2018, 12:48:04 pm

ORCoaster

  • Moderator
  • Veteran
  • Offline
  • ***
  • Handy at too many things to list. The envy of those needing Utube
  • 4549
  • Personal Text
    Caddy all painted and now its interior time
Re: where's a good place to buy injector inserts?
« Reply #4 on: June 03, 2018, 12:48:04 pm »
my dime is on inserts, pre-chambers, pucks, brass bling or whatever you call them. 
Logged
Reply #5June 05, 2018, 10:03:41 am

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: where's a good place to buy injector inserts?
« Reply #5 on: June 05, 2018, 10:03:41 am »
(banging shoe on desk....) "We must discuss these matters in private messages....otherwise state secrets are leaked..........................and then, we will bury you........"
https://www.youtube.com/watch?v=l4JhyHz3M5U
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #6June 05, 2018, 10:10:12 am

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: where's a good place to buy injector inserts?
« Reply #6 on: June 05, 2018, 10:10:12 am »
What this forum needs is some SUPER INTELLIGNT blue ink!
THEN, we would have the answers well all need........

For example:
The last set of inserts I used were made from a sardine can lid which I found lying under my Super Vauxhall XR-7Ti.........
....and on and on........
« Last Edit: June 05, 2018, 10:13:06 am by Dakotakid »
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #7June 05, 2018, 01:12:40 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Re: where's a good place to buy injector inserts?
« Reply #7 on: June 05, 2018, 01:12:40 pm »
Yes, nozzles.
 Injector nozzles for a good spray pattern and no pissers.
 We used to call them injector inserts in the olden days. Shows how long it's been since I bought any, ha.
 ORCoaster  I'll PM you a place to send that dime, ha
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #8June 05, 2018, 08:48:19 pm

ORCoaster

  • Moderator
  • Veteran
  • Offline
  • ***
  • Handy at too many things to list. The envy of those needing Utube
  • 4549
  • Personal Text
    Caddy all painted and now its interior time
Re: where's a good place to buy injector inserts?
« Reply #8 on: June 05, 2018, 08:48:19 pm »
When filling in the answer sheet, stay within the circle and use a BLACK or BLUE ink.  Blue is always the more correct of the two.



Logged
Pages: [1]
« previous next »