« previous next »
Pages: [1]

Author Topic: FS: single .25 over main bearings  (Read 3437 times)

March 25, 2018, 09:50:36 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
FS: single .25 over main bearings
« on: March 25, 2018, 09:50:36 pm »
I had to buy a whole set of main .25 over main bearings.
 Only needed 2 shells for the center bearing because the 1-piece center bearing was too wide for the .25 over crank. They didn't machine the thrust surfaces .25 over.
 I also have some used thrust washers for anyone in the same boat.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Pages: [1]
« previous next »