S-PAutomotive.com

Author Topic: WTB: VW 1.6 diesel turbo hose  (Read 3788 times)

August 03, 2017, 10:40:55 am

dailydubber

  • Newbie

  • Offline
  • *

  • 18
WTB: VW 1.6 diesel turbo hose
« on: August 03, 2017, 10:40:55 am »
I'm looking for the hose that comes from the turbo compressor outlet and into the intake manifold. I have a k24 Turbo. My zip code is 21666

Sent from my HTC6545LVW using Tapatalk




Reply #1August 03, 2017, 01:02:50 pm

RockOcean

  • Junior

  • Offline
  • **

  • 136
Re: WTB: VW 1.6 diesel turbo hose
« Reply #1 on: August 03, 2017, 01:02:50 pm »
I'm looking for the hose that comes from the turbo compressor outlet and into the intake manifold. I have a k24 Turbo. My zip code is 21666

Sent from my HTC6545LVW using Tapatalk
I have one from an AAZ 1.9L Turbo Diesel not sure if it's the same? The part number is 1H0 129 627 AB.



Sent from my SM-G925V using Tapatalk


Reply #2August 03, 2017, 01:22:56 pm

dailydubber

  • Newbie

  • Offline
  • *

  • 18
Re: WTB: VW 1.6 diesel turbo hose
« Reply #2 on: August 03, 2017, 01:22:56 pm »
I'm actually looking for the one
 coming out of the turbo and not going in the turbo like the one on this link:
http://www.mk1autohaus.com/Lifetime-Silicone-16L-TD-19L-Aaz-Turbo-Diesel--Intake-Boost-Hose_p_6518.html

Sent from my HTC6545LVW using Tapatalk


Reply #3August 04, 2017, 07:32:32 am

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5064
  • Personal Text
    America, DUCK YEAH!!!
Re: WTB: VW 1.6 diesel turbo hose
« Reply #3 on: August 04, 2017, 07:32:32 am »
if you are not worried about it looking original you can use a 2" silicone elbow, i have in the past. black silicone looks decent too.
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

Reply #4August 04, 2017, 05:08:13 pm

dailydubber

  • Newbie

  • Offline
  • *

  • 18
Re: WTB: VW 1.6 diesel turbo hose
« Reply #4 on: August 04, 2017, 05:08:13 pm »
if you are not worried about it looking original you can use a 2" silicone elbow, i have in the past. black silicone looks decent too.
I've tried putting a 90 degree elbow like you mentioned but it is getting kinked. I've also adjusted the compressor housing to lessen the kink but it didn't work. So I figured the original has special curves to prevent any kinks.

Sent from my HTC6545LVW using Tapatalk

Reply #5August 07, 2017, 07:40:07 am

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 5064
  • Personal Text
    America, DUCK YEAH!!!
Re: WTB: VW 1.6 diesel turbo hose
« Reply #5 on: August 07, 2017, 07:40:07 am »
mine was on an aaz which has a little bit different of an angle on the inlet hose so maybe i had better luck because of that.
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit

 

Fixmyvw.com