FS: Parting out AAZ engine what do you need? - page 1 - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: Parting out AAZ engine what do you need? by RockOcean on 30 Jul, 2017 16:49
• All parts listed below were pulled off of a running engine with 90k on it. Priced as listed plus shipping.
  
  - Water pipe to oil cooler engine coolant 037 121 065L $20
  
  - Oil feed line to turbo 028 145 771D  $50
  
  - Injection Pump Bracket 028 130 147A $150
  
  - Air hose ventilation for cylinder head cover 028 103 493 $10
  
  - Intake Manifold 028 129 713E  $70
  
  - VR6 water pump pulley $10
  
  - AAZ 1.9D Block can only be bored out to fit the 81mm ASV TDI pistons making the displacement 2.0L Pickup only in Roxbury, ME $200
  
  - Vacuum Pump $150
  
  - Connecting Rods $150
  
  - Main Caps with old style reusable bolts $50
  
  -  Harmonic Balancer 028 105 243 T  $35
  
  - Crankshaft with AHU crank sprocket. Needs a regrind for .25mm over sized bearings $350 shipped, $250 if you pick up.
  
  
  IMG_2145 by RockOcean.com, on Flickr
  
  IMG_2154 by RockOcean.com, on Flickr
  
  IMG_2183 by RockOcean.com, on Flickr
  
  IMG_2185 by RockOcean.com, on Flickr
  
  IMG_2189 by RockOcean.com, on Flickr
  
  IMG_2191 by RockOcean.com, on Flickr
  
  IMG_2192 by RockOcean.com, on Flickr
  
  IMG_2212 by RockOcean.com, on Flickr
  
  AAZBlockFront by RockOcean.com, on Flickr
  
  AAZBlockBack by RockOcean.com, on Flickr
  
  #4CylinderWear by RockOcean.com, on Flickr
  
  AAZVacuumPump by RockOcean.com, on Flickr
  
  ConnectingRods by RockOcean.com, on Flickr
  
  AAZMainCapsOldBolts by RockOcean.com, on Flickr
  
  AAZHarmonicBalancer by RockOcean.com, on Flickr
  
  CrankAHUSnout by RockOcean.com, on Flickr
  
  CrankAAZAHU by RockOcean.com, on Flickr
  
  
  
  
  
• #1 by RabbitJockey on 01 Aug, 2017 13:10
• do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
• #2 by RockOcean on 01 Aug, 2017 13:13
• Quote from: RabbitJockey on 01 Aug, 2017 13:10

  do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
  

  Yes I have the seal carrier. The injectors where rebuilt by Giles when I rebuilt the engine about 80k ago.
  
  Sent from my SM-G925V using Tapatalk
  
  
• #3 by RockOcean on 02 Aug, 2017 14:30
• Intermediate Shaft, and injectors are sold.
• #4 by RockOcean on 09 Aug, 2017 09:02
• Exhaust manifold has been sold.
• #5 by theman53 on 18 Sep, 2017 15:35
• you don't have any 1,3, and 5 cam caps for sale do you?
  
• #6 by RockOcean on 19 Sep, 2017 10:14
• I do have them but I am still thinking about rebuilding the head and selling it complete. So I don't really want to sell it piece by piece.
  
  Sent from my SM-G925V using Tapatalk
  
  
• #7 by libbydiesel on 27 Sep, 2017 19:31
• Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L.  Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options. 
• #8 by RockOcean on 28 Sep, 2017 10:29
• Quote from: libbydiesel on 27 Sep, 2017 19:31

  Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L.  Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options.
  

  Thanks for that tip Andrew. I purchased a running 96 Passat tdi with 230k a couple months ago for dirt cheap so I am eventually going to put that engine in my van.
  
  Sent from my SM-G925V using Tapatalk
  
  
• #9 by vanbcguy on 29 Sep, 2017 01:17
• I haven't seen a head gasket that actually works for the 2.0 bore on the earlier blocks. ALH+ is no issue, AHU/1Z there's no suitable gasket available.
  
  Sent from my LG-H873 using Tapatalk
  
  
• #10 by libbydiesel on 29 Sep, 2017 19:02
• I've seen on TDI club several people saying they used one of the G60 head gaskets without issue. 
• #11 by zuhandenheit on 11 Dec, 2017 11:52
• Hey,
  
  Do you have injector lines?
  
  Thanks!
• #12 by RockOcean on 13 Dec, 2017 13:38
• I do have them, unfortunately I am in Montana for the winter and the lines are in Maine. I will contact my friend to see if he can find them and ship them out. $50+ shipping sound fair?
   
• #13 by zuhandenheit on 13 Dec, 2017 23:30
• Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?
• #14 by RockOcean on 17 Dec, 2017 13:28
• Quote from: zuhandenheit on 13 Dec, 2017 23:30

  Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?
  

  Unfortunately my buddy is out of the country til the new year. I will contact you when he gets them in hand.
  
  Sent from my SM-G925V using Tapatalk