Author Topic: FS: Parting out AAZ engine what do you need?  (Read 6090 times)

July 30, 2017, 04:49:37 pm

RockOcean

  • Junior

  • Offline
  • **

  • 113
FS: Parting out AAZ engine what do you need?
« on: July 30, 2017, 04:49:37 pm »
All parts listed below were pulled off of a running engine with 90k on it. Priced as listed plus shipping.

- Water pipe to oil cooler engine coolant 037 121 065L $20

- Oil feed line to turbo 028 145 771D  $50

- Injection Pump Bracket 028 130 147A $150

- Air hose ventilation for cylinder head cover 028 103 493 $10

- Intake Manifold 028 129 713E  $70

- VR6 water pump pulley $10

- AAZ 1.9D Block can only be bored out to fit the 81mm ASV TDI pistons making the displacement 2.0L Pickup only in Roxbury, ME $200

- Vacuum Pump $150

- Connecting Rods $150

- Main Caps with old style reusable bolts $50

-  Harmonic Balancer 028 105 243 T  $35

- Crankshaft with AHU crank sprocket. Needs a regrind for .25mm over sized bearings $350 shipped, $250 if you pick up.


IMG_2145 by RockOcean.com, on Flickr

IMG_2154 by RockOcean.com, on Flickr

IMG_2183 by RockOcean.com, on Flickr

IMG_2185 by RockOcean.com, on Flickr

IMG_2189 by RockOcean.com, on Flickr

IMG_2191 by RockOcean.com, on Flickr

IMG_2192 by RockOcean.com, on Flickr

IMG_2212 by RockOcean.com, on Flickr

AAZBlockFront by RockOcean.com, on Flickr

AAZBlockBack by RockOcean.com, on Flickr

#4CylinderWear by RockOcean.com, on Flickr

AAZVacuumPump by RockOcean.com, on Flickr

ConnectingRods by RockOcean.com, on Flickr

AAZMainCapsOldBolts by RockOcean.com, on Flickr

AAZHarmonicBalancer by RockOcean.com, on Flickr

CrankAHUSnout by RockOcean.com, on Flickr

CrankAAZAHU by RockOcean.com, on Flickr




« Last Edit: February 10, 2020, 04:32:28 pm by RockOcean »



Reply #1August 01, 2017, 01:10:12 pm

RabbitJockey

  • Veteran

  • Offline
  • ***

  • 4978
  • Personal Text
    America, DUCK YEAH!!!
Re: FS: Parting out AAZ engine what do you need?
« Reply #1 on: August 01, 2017, 01:10:12 pm »
do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
98 Pontiac Grand Prix GT:stock daily
 81 Jetta: in progress 1.6td, ported head, holset turbo.
81 Rabbit:AAZ, hybrid T3 turbo, Giles pump, lightened fw, and yellow clutchnet clutch.

Reply #2August 01, 2017, 01:13:34 pm

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #2 on: August 01, 2017, 01:13:34 pm »
do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
Yes I have the seal carrier. The injectors where rebuilt by Giles when I rebuilt the engine about 80k ago.

Sent from my SM-G925V using Tapatalk


Reply #3August 02, 2017, 02:30:16 pm

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #3 on: August 02, 2017, 02:30:16 pm »
Intermediate Shaft, and injectors are sold.

Reply #4August 09, 2017, 09:02:18 am

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #4 on: August 09, 2017, 09:02:18 am »
Exhaust manifold has been sold.

Reply #5September 18, 2017, 03:35:38 pm

theman53

  • Global Moderator
  • Veteran

  • Offline
  • ****

  • 7832
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: FS: Parting out AAZ engine what do you need?
« Reply #5 on: September 18, 2017, 03:35:38 pm »
you don't have any 1,3, and 5 cam caps for sale do you?

Reply #6September 19, 2017, 10:14:44 am

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #6 on: September 19, 2017, 10:14:44 am »
I do have them but I am still thinking about rebuilding the head and selling it complete. So I don't really want to sell it piece by piece.

Sent from my SM-G925V using Tapatalk

« Last Edit: September 28, 2017, 11:19:39 am by RockOcean »

Reply #7September 27, 2017, 07:31:16 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3163
Re: FS: Parting out AAZ engine what do you need?
« Reply #7 on: September 27, 2017, 07:31:16 pm »
Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L.  Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options. 
HIGHEST QUALITY M-TDI PUMPS FOR SALE.  PM for details.

Reply #8September 28, 2017, 10:29:38 am

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #8 on: September 28, 2017, 10:29:38 am »
Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L.  Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options.
Thanks for that tip Andrew. I purchased a running 96 Passat tdi with 230k a couple months ago for dirt cheap so I am eventually going to put that engine in my van.

Sent from my SM-G925V using Tapatalk

« Last Edit: September 28, 2017, 11:20:11 am by RockOcean »

Reply #9September 29, 2017, 01:17:09 am

vanbcguy

  • Administrator
  • Veteran

  • Offline
  • *****

  • 2831
  • Personal Text
    Vancouver, BC
Re: FS: Parting out AAZ engine what do you need?
« Reply #9 on: September 29, 2017, 01:17:09 am »
I haven't seen a head gasket that actually works for the 2.0 bore on the earlier blocks. ALH+ is no issue, AHU/1Z there's no suitable gasket available.

Sent from my LG-H873 using Tapatalk

Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen

Reply #10September 29, 2017, 07:02:11 pm

libbydiesel

  • Global Moderator
  • Veteran

  • Offline
  • *****

  • 3163
Re: FS: Parting out AAZ engine what do you need?
« Reply #10 on: September 29, 2017, 07:02:11 pm »
I've seen on TDI club several people saying they used one of the G60 head gaskets without issue. 
HIGHEST QUALITY M-TDI PUMPS FOR SALE.  PM for details.

Reply #11December 11, 2017, 11:52:23 am

zuhandenheit

  • Junior

  • Offline
  • **

  • 195
Re: FS: Parting out AAZ engine what do you need?
« Reply #11 on: December 11, 2017, 11:52:23 am »
Hey,

Do you have injector lines?

Thanks!

Reply #12December 13, 2017, 01:38:42 pm

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #12 on: December 13, 2017, 01:38:42 pm »
I do have them, unfortunately I am in Montana for the winter and the lines are in Maine. I will contact my friend to see if he can find them and ship them out. $50+ shipping sound fair?
 

Reply #13December 13, 2017, 11:30:31 pm

zuhandenheit

  • Junior

  • Offline
  • **

  • 195
Re: FS: Parting out AAZ engine what do you need?
« Reply #13 on: December 13, 2017, 11:30:31 pm »
Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?

Reply #14December 17, 2017, 01:28:13 pm

RockOcean

  • Junior

  • Offline
  • **

  • 113
Re: FS: Parting out AAZ engine what do you need?
« Reply #14 on: December 17, 2017, 01:28:13 pm »
Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?
Unfortunately my buddy is out of the country til the new year. I will contact you when he gets them in hand.

Sent from my SM-G925V using Tapatalk