in an emergency, you can just throw on a generic hose from pepboys, or autozone, advance. -that hose, a length of hose you can make the 90deg turn will work; all you need is a few tools. a screwdriver or two, may need pliers or channel locks, a 1/4" wrench or socket can help as a standard size clamp for water hoses and other hoses if needed a 1/4"will fit and you can tighten it more than a screwdriver. most clamps you can snap with a 1/4" so dont crank it down too much. you now can drive home without much problem, just need some water to top off after hose drains some,, the hose kits from napa seemed a good price and good quality, the hose next to it i swapped a napa hose it, for $9 and it was made in either ger or turkey. feel good about it. i get a lot of my parts from the richmond warehouse.