Clutch slips at about 12 psi - Upgrades (non engine related ) - VWDiesel.net The IDI, TDI, and mTDI source.

• Clutch slips at about 12 psi by bryanb on 06 Jun, 2015 00:14
• Well I need a new clutch but can't find anything better than stock for a 1.6 TD FF code trans so please point me in a direction? I plan on building the engine including internals as much as possible so strong is key.
• #1 by theman53 on 06 Jun, 2015 11:14
• Upgrade to a 210mm flywheel and clutch. If you are going for bunches of more power look for a company called Clutchnet. Don't get a solid hub clutch. When you get a flywheel there are 1 pin and 2 pin 210mm versions, get the clutch that matches.
• #2 by bryanb on 07 Jun, 2015 23:36
• Quote from: theman53 on 06 Jun, 2015 11:14

  Upgrade to a 210mm flywheel and clutch. If you are going for bunches of more power look for a company called Clutchnet. Don't get a solid hub clutch. When you get a flywheel there are 1 pin and 2 pin 210mm versions, get the clutch that matches.
  

  
  I thought the ff code trans was one of the phew a 210 flywheel would not clear the bell housing
• #3 by theman53 on 08 Jun, 2015 10:11
• The OD of all the 020 flywheels are the same IIRC. The inside clutch surface is the only difference. I have seen 4 speed trans with 210 in them no issues.
• #4 by bryanb on 08 Jun, 2015 10:23
• Ok thanks