Author Topic: WTB: for a friend, I need an 11mm head---not needed (Read 4203 times)

theman53 · « **on:** September 25, 2014, 03:32:24 pm »

I young 16 year old kid has a 1.5 that is in need of a cylinder head. He is just looking for something runnable, ideally, a 50.00 core head that could be ran. Let me know if you have anything of interest. He would take any 12mm head and reduce it down at the oil drain if it was cheap enough.

rallydiesel · « **Reply #1 on:** September 25, 2014, 05:15:39 pm »

I've got a 11mm 1.6 engine that I'm tearing down. I haven't taken it apart yet so I don't know if it's got any fatal flaws but I will let you know what I find and post some pics when it's apart.

theman53 · « **Reply #2 on:** September 25, 2014, 05:38:42 pm »

Good enough. He is just wanting something to clean up and go for cheap.

Toby · « **Reply #3 on:** October 11, 2014, 10:13:06 pm »

I have a couple 1.5 heads around here somewhere. I would need $100 plus shipping for one. I would have to dig them out before I would have an idea about condition. Nothing was bent, broken, or burned or I would not have kept them. Let me know.

theman53 · « **Reply #4 on:** October 11, 2014, 10:48:42 pm »

Sorry, he ended up buying another engine instead

rallydiesel · « **Reply #5 on:** October 29, 2014, 08:16:14 pm »

Hopefully a 12 mm head 😛.

Author Topic: WTB: for a friend, I need an 11mm head---not needed (Read 4203 times)

theman53

WTB: for a friend, I need an 11mm head---not needed

rallydiesel

Re: WTB: for a friend, I need an 11mm head

theman53

Re: WTB: for a friend, I need an 11mm head

Toby

Re: WTB: for a friend, I need an 11mm head

theman53

Re: WTB: for a friend, I need an 11mm head

rallydiesel

Re: WTB: for a friend, I need an 11mm head---not needed