-
Factory output of a 1.6td
by
bryanb
on 18 Jun, 2014 19:28
-
Anyone know of hand what the factory output on the 1.6td is? And if so what what do you think mine is now if I have a t3 Giles pump?
-
#1
by
Alcaid
on 19 Jun, 2014 03:33
-
How long is a rope.... Being a bit more precise would make it easier to give you a reply
1.6TD came with 60bhp, 70bhp and 80bhp
Are you now running the stock 1.6TD T3 or another T3? Stock one flows 20lbs/min so should be good for about 140bhp but with a turned up 9mm pump normally stops at 120-130bhp
What has been done to your pump? Do you know how much fuel it supplies? (cc), what size piston etc?
-
#2
by
bryanb
on 19 Jun, 2014 05:13
-
Well *** did know their are so many Variables but it Is a Garrett t3 and I don't know the specifics on the pump but I was told should peak at about 26lbs but have not tested that yet
-
#3
by
scrounger
on 19 Jun, 2014 05:35
-
The under the hood sticker shows 52 for the non turbo and 68 for TD.
-
#4
by
theman53
on 19 Jun, 2014 06:02
-
The under the hood sticker shows 52 for the non turbo and 68 for TD.
and 70for the eco, 80 for the GTD...approx.
Garrett made many t3 turbos, which one do you have
-
#5
by
scrounger
on 19 Jun, 2014 06:08
-
The Man
What are the differences with the GTD. More boost, intercooler.
Thanks.
-
#6
by
Alcaid
on 19 Jun, 2014 07:12
-
Eco was 60 not 70 (engine code 1V, 8mm pump without LDA)
-
#7
by
JerryGTD
on 19 Jun, 2014 08:41
-
ECO was rated at 44KW or 59HP.
-
#8
by
theman53
on 19 Jun, 2014 15:21
-
My bad...rounding numbers and missed the 6 for 60.
-
#9
by
bryanb
on 19 Jun, 2014 19:23
-
Tomorrow I will snap a pic of the data plate on the pump and turbo.