Quieting the intake?

[burn_your_money]

So the dryer hose is your actual intake hose, post filter correct?

[Gizmoman]

So the dryer hose is your actual intake hose, post filter correct?

Considering the direction of air-flow, I'd call it pre-filter

Here's a shot of the intake HARD piping from the filter to the turbo inlet



Here's a shot down the RH pillar through the vent. You can make out the dryer vent tube inside the collum

[burn_your_money]

That makes more sense. Thanks Jim.

[GEE-BEE]

I can make this for you with smooth cuffs

http://www.aircraftspruce.com/catalog/appages/sceet.php?clickkey=5261

advise your i.d. and length

3' i.d. is 3.50 per inch

http://www.beechtalk.com/forums/viewtopic.php?f=37&t=90998&view=unread#unread

[RabbitJockey]

[GEE-BEE]

85 % of my work is aircraft gaskets , hoses and ducts

I support 465 different models of aircraft, I do the silicone automotive for ***s and giggles

The ducati coolant hoses allows me to get a new model to tool for every two years..

If you want the best quality, let me know

My silicone ticco hoses kits sell very well, and are shown above..

GB

Name three people that were shot in the back of the head

1. President Lincoln
2.President Kennedy
3.The Guy sitting in front of Pee-Wee at the adult theatre

[Gizmoman]

I can make this for you with smooth cuffs

http://www.aircraftspruce.com/catalog/appages/sceet.php?clickkey=5261

advise your i.d. and length

3' i.d. is 3.50 per inch

http://www.beechtalk.com/forums/viewtopic.php?f=37&t=90998&view=unread#unread

Thanks for the offer, The aluminum drier vent pipe is working just dandy and I think the rough ID helps quiet things a bit.

I don't get it. However, I've shot skeet, sometimes even two, but never three. Oh, and I believe that guy's been caught shooting something as well (sorry)

Gee-Bee, ironically, I was posting this at the same time

[GEE-BEE]

Its spelled Sceet

Its a 2 ply silicone with one wire fiberglass reinforcement..

Used in heater and intake air applications..

GB

[Gizmoman]

Its spelled Sceet

Its a 2 ply silicone with one wire fiberglass reinforcement..

Used in heater and intake air applications..

GB

Thanks for the explanation and good to know what you can do. I design separation machinery for the recycling industry and I'll file this info in my head for a possible solution of some sort.

[RabbitJockey]

Name three people that were shot in the back of the head

1. President Lincoln
2.President Kennedy
3.The Guy sitting in front of Pee-Wee at the adult theatre

hahaha, thats one of my favorite jokes

and skeet was something dave chappelle used to say frequently, its meaning is perverse