Hi
So the situation is this....
no heat... and appearance of no circulation of coolant...
I thought it was the thermostat......
nooooooooooo, it is not....put a new one in..
Now.... I did just do a head gasket...
and I ran it for about 500 miles....
and it seemed ok....
How about methodology on filling RAD
the system with anti-freeze... I mean
I thought I did alright,,,
I disconnected the feed heat hose
to the heater core.. and poured
in antifreeze at the top hose connection
at the radiator..... till it poured out hose
near heater core..... andthen filled
radiator with a little 90 degree bend tube,,,,
I dont think I have 7 quarts in there,,,,
So if I run it for a while... It willl overheat...
and when it is overheated.... the top hose
will be hot.... and the return on the heater
core will be hot.,,,,, and the bottom rad
hose will be cold... and the feed to core
will be cold also.........
Any suggestions?
Air?
? bad pump?
??
Monst