-
#15
by
vwmike
on 21 Mar, 2006 17:37
-
I understand where you're coming from. I just can't dodge the cost of the parts it would take to produce this in any sort of quantity. Using a junk yard intercooler would definitely cut down on the cost. I was just trying to make a complete bolt-on system. The other thing is that a lot of factory intercoolers have plastic tanks that will pop off and that is something I need to avoid.
-
#16
by
BlackTieTD
on 21 Mar, 2006 17:47
-
i agree with all your concerns. if i had $600 to spend on an intercooler that would be great but i don't so i'd use some junk with plastic end tanks and keep the boost lower. for me its the pipes that would be a pain in the ass to come up with. good luck with it. i think its a great idea, just making it cost-feasible small-scale is the issue i think for you.
-
#17
by
Turbo DS
on 23 Mar, 2006 07:28
-
I've read over the years about plastic end tanks having issues like popping off, etc, yet I've never seen such a thing, nor have I ever had a problem with it. This is with using saab (3 different types), and a few friends running volvo (2 types) plastic end tank intercoolers with 30 psi or over, for years.
Chances are if indeed the end tank pops off (unlikely), it has already sustained some type of trauma, and all that would be needed is to re crimp the tabs on the core to end tank joint, or get another untweaked core.
-
#18
by
tmaybee
on 09 May, 2006 12:42
-
I would definetly be interested in a a kit for a MK2 1.6td with A/C.
-
#19
by
RabbitJockey
on 09 Nov, 2006 18:38
-
i know the pricing is high, but if you look at kits like these for any other type of car, this is actually a great deal
-
#20
by
Baselyne
on 25 Nov, 2007 09:31
-
I have always wanted a intercooler kit for our cars.... if you planning on making a cooler and all the piping then im sure we could expect youd find a good place for it and make it to fit properly
If you can make a cooler for between my rad and front end supports and its piped out like passingers wicked exhaust mani then im in.....$600 or whatever...
I hope you come up with something, Best of luck!
-
#21
by
spencebm
on 25 Nov, 2007 13:49
-
i am open to the idea, but it has to be affordable. the hardest thing to do is get the pipe bent right. i think everyone can find coolers that will fit in front but it is just hard to get pipe to them without spending a lot of money. silicone connectors are expensive and so is aluminum pipe and these aren't bentley's that we're driving around so i am probably going to try something myself and mess up before i spend a lot of money. you learn better that way :wink: good luck with the kit!
-
#22
by
Baselyne
on 25 Nov, 2007 17:33
-
I was just wondering which cars I should be looking at/for a intercooler for our cars while im crusing thru the wreckor
I was told there is a nice cooler on some Volvo maybe someone could pass the word on which model?
Also I remember hearing something about a SAAB cooler also? Which Sabb?
Also In the Vendor's section I remember seeing in one of "Passinger's pictures of the "Custom Intake Mani Thread" there is a beautiful intercooler in the picture with the two turbo's and the cylinder head sitting on the ground! EDIT*
I was wondering who or where to get something like that....should be perfect to fit between the rad an rad support area behind the lights!
Where and How Much for one of these babies?
-
#23
by
spencebm
on 25 Nov, 2007 23:08
-
cheap ones on ebay, i dont know if they are any good
-
#24
by
subsonic
on 27 Nov, 2007 16:26
-
-
#25
by
935racer
on 27 Nov, 2007 16:53
-
-
#26
by
Baselyne
on 01 Dec, 2007 16:39
-
ahhhh you dont even know what your doing to me with this...
Im trying to convince the gurls that christmas is next year... not this year so I can afford that set up...
Just playin, im sure all the ladies MK1 tuners didnt like that one!
You'll be hearing from me soon with any luck....
thanks for the pictures and support in my interest!
Cheers,
BASE
-
#27
by
red64chevelle
on 01 Dec, 2007 17:23
-
Does anybody sell a IC kit for a mk1 TD? I have heard of kits for mk2's and up, but no mk1's.
-
#28
by
okron1k
on 17 Dec, 2007 18:18
-
i would probably grab one from you.. as long as the quality is there.
for me personally.. i enjoy best bang for buck and quality.
i'll draw a small scale right now (ps. i'm drunk)
$---------------------$$$$$$$$$
A----B----C----D----E
a=***ty don't buy
b=***ty but not as ***ty cuz it will last a bit longer
c=mid range.. quality is there with the use of cheaper materials
d=like mid range but with better materials
e=top of the line in material and quality and looks
for me.. i'm a D or E or somewhere between those two letters kinda guy. on my own scale... yeahh...
okan
-
#29
by
Baselyne
on 17 Dec, 2007 18:40
-
I was just wondering is Dave back from the Hospital yet and building or?
the quality sure looks like its there...
I asked a few people who have those kits and there all talking like I should pawn my simiese cat and get it asap and I figure they must be alright if their reputation is that good.. I mean pawn my cat!?!?!???!
But that mani/downpipe/cooler and even the piping is top notch
What a toss up Cat or intercooler
Man my lady would kill me