« previous next »
Pages: [1]

Author Topic: AAZ return line help  (Read 1958 times)

November 24, 2013, 06:18:51 pm

Jagerauto

  • Junior
  • Offline
  • **
  • 144
AAZ return line help
« on: November 24, 2013, 06:18:51 pm »
Hey guys finally got my motor in! I. Need to finish the return line before I can finish the exhaust.

What size is the banjo bolt into the block?

I'm using a T3 turbo, I ordered a flange for it with a -10AN fitting. So I need an adapter from the thread on the block with a 90 into a -10AN. Then a hose.

Don't want this to leak. So please help!
Logged
Reply #1November 24, 2013, 06:56:45 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: AAZ return line help
« Reply #1 on: November 24, 2013, 06:56:45 pm »
IIRC it is 22mm.
Logged
Reply #2November 24, 2013, 08:57:34 pm

Jagerauto

  • Junior
  • Offline
  • **
  • 144
Re: AAZ return line help
« Reply #2 on: November 24, 2013, 08:57:34 pm »
Something like this then?

http://bit.ly/1esFm27
Logged
Reply #3November 25, 2013, 04:54:29 am

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: AAZ return line help
« Reply #3 on: November 25, 2013, 04:54:29 am »
yes, the a/n and JIC are the same so any local hydro shop should have the JIC. I like JIC as it is steel and the aluminum a/n fittings and I don't get along well.
Logged
Reply #4November 26, 2013, 07:37:27 am

stewardc

  • Guest
Re: AAZ return line help
« Reply #4 on: November 26, 2013, 07:37:27 am »
Yup, this is what you need. Take the banjo bolt to any good hydraulic shop and they've got the fitting.

Logged
Pages: [1]
« previous next »