« previous next »
Pages: [1]

Author Topic: Calibrating ALH Injectors  (Read 6722 times)

November 20, 2013, 04:44:33 pm

aadonline

  • Guest
Calibrating ALH Injectors
« on: November 20, 2013, 04:44:33 pm »
Hi all,

Is there anyone who can do injector pop testing and calibration for an ALH in Calgary area.

Thanks
Logged
Reply #1November 27, 2013, 12:19:28 pm

ORCoaster

  • Moderator
  • Veteran
  • Offline
  • ***
  • Handy at too many things to list. The envy of those needing Utube
  • 4549
  • Personal Text
    Caddy all painted and now its interior time
Re: Calibrating ALH Injectors
« Reply #1 on: November 27, 2013, 12:19:28 pm »
We need an individual who has a pop tester and is wiling to ship it around to those of us that just need it once.  Any one willing?

We pay shipping and a few bucks for wear and tear? 
Logged
Reply #2November 27, 2013, 12:49:40 pm

vanbcguy

  • Veteran
  • Offline
  • ***
  • 2825
  • Personal Text
    Vancouver, BC
Re: Calibrating ALH Injectors
« Reply #2 on: November 27, 2013, 12:49:40 pm »
All the TDIs have two stage injectors - there's not really anything you can do with a pop tester other than inspect the spray pattern.
Logged
Bryn

1994 Jetta - AHU M-TDI - Jezebel Jetta
2004 Jetta Wagon - 1.8T - Blitzen
Reply #3November 27, 2013, 08:06:54 pm

ORCoaster

  • Moderator
  • Veteran
  • Offline
  • ***
  • Handy at too many things to list. The envy of those needing Utube
  • 4549
  • Personal Text
    Caddy all painted and now its interior time
Re: Calibrating ALH Injectors
« Reply #3 on: November 27, 2013, 08:06:54 pm »
Most of us just want to replace the nozzles, check the spray pattern and the break pressure and that is it.  Pop tester is still needed. 
Logged
Reply #4November 27, 2013, 09:10:33 pm

CRSMP5

  • Guest
Re: Calibrating ALH Injectors
« Reply #4 on: November 27, 2013, 09:10:33 pm »
but unlike idi.. no shims that ive seen..
Logged
Reply #5December 24, 2013, 07:39:10 pm

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: Calibrating ALH Injectors
« Reply #5 on: December 24, 2013, 07:39:10 pm »
Quote from: CRSMP5 on November 27, 2013, 09:10:33 pm
but unlike idi.. no shims that ive seen..

There are shims and rods that can be changed. Well, according to Bosch rods only. Giles can calibrate them with some snazzy electronics that he has that will show both opening pressures.
Logged
Tyler
Reply #6January 03, 2014, 01:42:13 am

Toby

  • Veteran
  • Offline
  • ***
  • 728
Re: Calibrating ALH Injectors
« Reply #6 on: January 03, 2014, 01:42:13 am »
I have a OTC pop tester and could check breaking pressure and pattern for a half rack.
Logged
Pages: [1]
« previous next »