FS: 1.6 Part out:k14, k03,T3, serp bracket, pump, injectors, pyro and bst gages - page 1 - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: 1.6 Part out:k14, k03,T3, serp bracket, pump, injectors, pyro and bst gages by flapjack on 11 Nov, 2013 11:04
• Shipping from Westwood NJ.
  All prices are + shipping
  
  All prices are OBO, I haven't spent a ton of time researching the pricing.
  If a price seems off, please let me know.
  
  If you need something not on the list, post up an offer.
  
  
  All 1.6 parts:
  
  K14 Turbo with no shaft play $100
  
  Rebuild kit for K14 $50
  
  
  
  Stock Exhaust manifold for K14 $50
  
  
  
  Stock Intake manifold $50 ***SOLD****
  
  
  
  Serpentine belt bracket with tensioner: $50
  
  
  
  Serp Pulley for water pump $15
  Serp Pulley, crank with V belt pulley for power steering $40
  
  
  
  
  
  Saab T3 Turbo, rebuilt, balanced $60
  
  
  
  
  
  
  
  Oil return line for T3 to stock oil pan $35
  
  
  Oil Feed Line for Saab T3 with adapter for VW oil filter housing  $30
  
  
  
  Downpipe, for Saab T3 (home made)   $75
  
  
  
  Injectors, used for a few hundred miles: (4) for $90
  
  VDO Pyro gage, $35  **SOLD**
  VDO boost gage, $25 ** SOLD **
  Genuine Custom Imitation Wood Panel Mounting Kit $Priceless  ***SOLD****
  
  
  
  8v gasser Exhaust manifold with T3 flange
  Drilled and tapped for the spruce pyro sensor: $50
  
  
  
  Fuel lines $20
  
  
  
  Pyro sensor from aircraft spruce: $20   ***SOLD**
  
  Intake mani from a G60 (intake on drivers side)
  With intake / square to round adapter $30
  
  
  
  Eco 1.6 diesel pump $50
  
  1.6TD pump $100 **SOLD**
  
  Throttle cable, I think for 1.9TD? not sure  $10
  
  
  
  Oil pan, 1.6 turbo idi $35
  
  
  K03 Turbo from Passat 1.8T
  MISSING WASTE GATE FLAP   $75
  
  
  
  
  Speedo cable 1.6 Eco TD  $10
  
• #1 by theman53 on 11 Nov, 2013 11:23
• If the pyro sensor is the micro 1000 I will take it.
• #2 by flapjack on 11 Nov, 2013 11:27
• no idea which one it is. When I get the manifold off, I'll take some pictures.
  All I remember is it's the one Libby was recommending a couple years back.
• #3 by TylerDurden on 11 Nov, 2013 11:48
• Engine in car and plumbed/hookups? (radiator, shifter, tranny, wiring, etc?)
  
  Pix?
• #4 by flapjack on 11 Nov, 2013 13:45
• 
  Yes, I drove the car for a few hundred miles, but it's still very much a project and barely a daily driver.
  
  Wiring is a bit of a hack job. Needs to be cleaned up.
  Gages are hanging off a wire, not properly installed.
  Drained the coolant a year ago to change the T-stat, and haven't touched it since.
  Rear calipers are seized.  Front subframe/brakes the whole deal is from the A2
  Has a home made 2.5" DP, but ehaust is sCrap.
  Power steering is in my shed somewhere
  It's far from perfect, but it did get me to work for a month.
  
  
• #5 by theman53 on 11 Nov, 2013 21:47
• that should be the micro 1000. I am in no hurry so whenever
• #6 by bbob203 on 11 Nov, 2013 22:05
• Interested in t3 and manifold with pics. oil drain come with it to?
• #7 by damac on 11 Nov, 2013 22:13
• does the k14 need rebuilt with that kit or useable as is?
  
  what difference would i notice with an fn tranny, stock fueling compared to my t3?
  
  would it make the driving experience any better passing people in fifth gear?
• #8 by flapjack on 12 Nov, 2013 07:20
• 
  Thanks for the interest guys.
  I didn't think I'd get as many quick inquiries, I don't have anything pulled yet
  Probably won't be able to pull anything before Saturday. I'll get pics up asap.
  
  Damac
  The k14 is fine the way it is.
  As far as how it drives vs a T3, I haven't driven them in way too long to give an objective honest answer.
  I'd search the IDI threads.
  
  bbob203
  if you want the oil return, you got it.
  when i get that stuff pulled, I'll take some pics.
• #9 by bbob203 on 12 Nov, 2013 08:37
• Might you also have to corresponding intake boot for the t3 as well?
• #10 by 92EcoDiesel Jetta on 12 Nov, 2013 18:18
• Pm sent on TD pump.
• #11 by Rising on 13 Nov, 2013 00:18
• Does the vdo boost gauge function ? What does it read? I'm interested in that and the oil feed and return lines.
  Also what does the g60 manifold look like? Does it have a tb with it or any way to hook up a pipe ?
  
  Sent from my ADR6400L using Tapatalk 2
• #12 by Fizzbane on 13 Nov, 2013 19:29
• Pm sent on k14 & rebuild kit.
• #13 by bbob203 on 17 Nov, 2013 09:08
• Still waiting on pics for T3 !! 
• #14 by theman53 on 17 Nov, 2013 09:39
• Quote from: theman53 on 11 Nov, 2013 21:47

  that should be the micro 1000. I am in no hurry so whenever
  

  
  No hurry on it but I do not want you to sell it elsewhere. Let me know where to send the money whenever, it is going in the Jeep project. I won't need it until next spring at the earliest.