AAZ return line help - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• AAZ return line help by Jagerauto on 24 Nov, 2013 18:18
• Hey guys finally got my motor in! I. Need to finish the return line before I can finish the exhaust.
  
  What size is the banjo bolt into the block?
  
  I'm using a T3 turbo, I ordered a flange for it with a -10AN fitting. So I need an adapter from the thread on the block with a 90 into a -10AN. Then a hose.
  
  Don't want this to leak. So please help!
• #1 by theman53 on 24 Nov, 2013 18:56
• IIRC it is 22mm.
• #2 by Jagerauto on 24 Nov, 2013 20:57
• Something like this then?
  
  http://bit.ly/1esFm27
• #3 by theman53 on 25 Nov, 2013 04:54
• yes, the a/n and JIC are the same so any local hydro shop should have the JIC. I like JIC as it is steel and the aluminum a/n fittings and I don't get along well.
• #4 by stewardc on 26 Nov, 2013 07:37
• Yup, this is what you need. Take the banjo bolt to any good hydraulic shop and they've got the fitting.