FS: 1.9 Turbo Diesel AAZ. Rebuilt head (Frank Irving, stg 2 cam)

[Jagerauto]

Selling the AAZ swap I've been working on. No time to fool with this anymore, my life has changed direction and I'm tired of storing it at the shop.


Specs on the motor:
112k on bottom end roughly
0 miles on the rebuilt head
Frank Irving rebuilt this head, if you don't know his heads are the quietest once he's done with them.
Stage 2 ALH cam and new ALH lifter set.
T3 turbo off an 84 quantum, with 109k. No shaft play.
All new gaskets
1.8t water pump with only two water outlets.
ARP Head studs from Kerma TDI NEW.
Bottom end was taken apart, inspected, lubed up with gear oil, and torqued down. (Knew I would be storing it)
Everything is here and together.

Looking to get $2000 obo!

I have $1000 into the head alone I will take $300 off the price to not include the stage 2 cam/lifter set.

Looking to sell my 81 caddy too let me know!!

Located in Newport News VA 23602 USA
Call or text 757-541-7377

[Jagerauto]

Up for sale again. $2000obo!!!

Just the motor!!

Its in my truck at the moment. I will have it pulled when I have a serious buyer. Motor has still yet to be ran, but I did finish the oil return line. Also I have primed the oil system and gotten fresh oil to everything.

Was going to fire it up but don't have correct starter bolts for the 02j transmission.

I'm over it, I just want it all gone. It's been a tinker thing for me and my truck needs more than just tinker time.


Sent from my iPhone using Tapatalk

[Jetmugg]

Has it ever been run on a dyno?

I'd be very interested to know the power and torque numbers for this engine.

Steve.

[Jagerauto]

Never but I might know soon. Going to be putting motor in a cabby