« previous next »
Pages: [1]

Author Topic: Bearing question  (Read 2014 times)

September 23, 2013, 04:48:24 pm

jimfoo

  • Veteran
  • Offline
  • ***
  • 2110
    • http://www.66rover.com
Bearing question
« on: September 23, 2013, 04:48:24 pm »
I ordered some intermediate shaft bearings online, and what I got seems to be steel  ??? Is that what they are really made out of? I have just never seen a steel engine bearing for anything in my life. And an off topic question, where is a good place to get the AAZ oil pan gasket/windage tray? Mine has a bit of a hole in it. Thanks all!
Logged
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily
Reply #1September 23, 2013, 05:16:10 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Bearing question
« Reply #1 on: September 23, 2013, 05:16:10 pm »
037115220B is the part # for the pan gasket you want.
http://www.vagoem.com/z/part/037115220b-oil-pan-baffle   list of sites selling

backing is steel but the inside shouldn't be
Logged
Reply #2September 23, 2013, 09:34:35 pm

jimfoo

  • Veteran
  • Offline
  • ***
  • 2110
    • http://www.66rover.com
Re: Bearing question
« Reply #2 on: September 23, 2013, 09:34:35 pm »
Thanks! The inside looked like steel, but looking at it closer, I guess it isn't. The color is just really close. Thanks for the gasket link too
Logged
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily
Pages: [1]
« previous next »