Login
▼
Register
Home
Help
Advertise
Login
Register
VWDiesel Blog
Facebook Group
VWD on Twitter
VWDiesel.net The IDI, TDI, and mTDI source.
»
Engine Specific Info and Questions
»
IDI Engine
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
« previous
next »
Print
Pages:
1
[
2
]
Author
Topic: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked (Read 8172 times)
Reply #15
August 10, 2013, 07:34:27 pm
Blocksmith
Veteran
Offline
261
Personal Text
Wrench Lurker
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #15 on:
August 10, 2013, 07:34:27 pm »
That is a sick Mk1 jetta. What suspension setup are you running?
Yeah, an intercooler would be nice. You could potentially work with what you've got if you reclocked the compressor housing, but it's hard to say, really. You would probably benefit from a gasser intake manifold. And of course, relocating the air filter further forward, away from all that exhaust manifold heat.
I don't know much about methanol injection, but I can't imagine that for our diesels that it's that much removed from what gasser guys are using?
It all depends on what you're willing/able to do. Piping kits and/or fabrication will make a world of difference for you. Please post pics of your final setup.
Logged
Green 83 Rabbit 4dr, 5 speed ACH trans swap, ported 1.6D mech lifter w/ vnt15, na pump w/ gov mod, gasser intake mani, 2.5" exhaust, bilstein sports and cut mk2 springs, ss brake lines, 14" vw bottlecaps
Reply #16
August 10, 2013, 09:04:15 pm
01
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #16 on:
August 10, 2013, 09:04:15 pm »
ordered some piping so i can redo the intake. went out and looked at my options, thinking routing to the raintray will be the easiest and best solution to get away from the heat... hey i have a scoop for a reason right
as for the awic stuff, it sounds like i great idea. just need to play around to see if i can get piping routed right.
--
Car is on custom valved RLs, actually rides quite well.
full build for this car is on vortex -
http://forums.vwvortex.com/showthread.php?5493776-My-4th-Mk1
..
Logged
Reply #17
August 10, 2013, 09:20:45 pm
theman53
Global Moderator
Veteran
Offline
7834
Personal Text
Holmes County Ohio - North Central Ohio
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #17 on:
August 10, 2013, 09:20:45 pm »
FWIW I think you could add the CIS intake and then run the inlet to the turbo to the area behind the grill. In between the battery and rad if possible, that way you wouldn't have to cut your rain tray up.
Looking at your intake I don't like its design much more than the factory TD one...which could be another option.
Logged
http://www.vwdiesel.net/forum/index.php?topic=16572.0
Round 2
http://www.vwdiesel.net/forum/index.php?topic=31758.0
Quote
...BTW your Bieber avatar is awesome.-Malone
Reply #18
August 10, 2013, 10:48:40 pm
CRSMP5
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #18 on:
August 10, 2013, 10:48:40 pm »
if its a rayjay like mine.. to reclock is cake.. 1 v band style clamp..
and 8v manifold should fit..
turn turbo towards firewall and mani of choise..
bet that is a nice kick in arss if it hits as hard as 7 psi did.. but does it hit as hard? had lots of lag.. 3k till it hit.. id almost bet on my toaster it would break the tires free like a 930... at 3000rpm..
Logged
Reply #19
August 11, 2013, 02:43:59 pm
01
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #19 on:
August 11, 2013, 02:43:59 pm »
i had the standard bae rayjay on and it hit pretty hard, but with this it hits just as hard but earlier
comparison of both of the turbos i have, im running the arkay right now as the bigger one lagged too much..
«
Last Edit: August 24, 2013, 05:07:37 pm by 01
»
Logged
Reply #20
August 24, 2013, 05:05:38 pm
01
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #20 on:
August 24, 2013, 05:05:38 pm »
New intake setup, and yeah a cut a hole in the raintray, i figure the intake and hood scoop are now functional.
and got the boost gauge installed finally:)
not bad peak boost for dialed back fuel screw and BAE kit
http://www.youtube.com/watch?v=NvVJCIZ5Kv0
«
Last Edit: August 24, 2013, 05:10:28 pm by 01
»
Logged
Reply #21
August 24, 2013, 06:24:02 pm
8v-of-fury
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #21 on:
August 24, 2013, 06:24:02 pm »
Did you couple it at the raintray?? or is it a pipe that moves with the engine?
Logged
Reply #22
August 25, 2013, 02:04:16 pm
01
Guest
Re: Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #22 on:
August 25, 2013, 02:04:16 pm »
It moves with the engine but I've given it enough room to wiggle and not make noise. I also added a seal around where the cuts were made.
Logged
Reply #23
August 25, 2013, 06:05:29 pm
745 turbogreasel
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #23 on:
August 25, 2013, 06:05:29 pm »
I'd replace that breather with a CDR valve and draft tube before it makes a mess.
Logged
Reply #24
August 25, 2013, 06:49:16 pm
01
Guest
Re: Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #24 on:
August 25, 2013, 06:49:16 pm »
I actually just came back in the house from the garage. That's exactly what I was messing around with.
I just need to find a way to tap back into the intake stream now.
Logged
Reply #25
August 25, 2013, 06:55:01 pm
8v-of-fury
Guest
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #25 on:
August 25, 2013, 06:55:01 pm »
90 off of the VC, and thread a nipple fitting in that intake tube. Is it thick enough to get a thread or two of grab?
Logged
Reply #26
August 26, 2013, 11:25:16 pm
CrazyAndy
Veteran
Offline
739
Re: BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked
«
Reply #26 on:
August 26, 2013, 11:25:16 pm »
If you can't get a thread to grab on your pcv bung you install in the intake pipe, just use a thin bolt behind it and seal around the threads with sealant.
I'm also another proponent of AWIC. Mount it over your trans where you have room. Go with a core that does both pipes on one side, run the 8v gasser mani, and you can run minimal charge piping. Your turbo orientation is actually oriented near-perfect for this setup. What's your exhaust piping diameter?
P.S.: Love your wheels; ATS classics are my dream wheel set. I don't do staggered, however; like to rotate the tires so I'd run spacers in back.
Logged
Print
Pages:
1
[
2
]
« previous
next »
VWDiesel.net The IDI, TDI, and mTDI source.
»
Engine Specific Info and Questions
»
IDI Engine
(Moderators:
malone
,
burn_your_money
,
Vincent Waldon
,
theman53
) »
BAE Turbo Kit - Non Intercooled - Loss Of Power When Heat Soaked