AAZ questions

[HarryMann]

I have just replaced my turbo (Garrett T2, off a 1.6 JX, cos its a 50 degree installation on VW truck), and pretty sure my injectors have taken a right hammering from running on oil pouring into the turbo by the bucketful at times (detonation, grey smoke etc).

Having fitted a bleed valve and stopped up the BOV, so running just a few psi extra boost, should I buy just the standard AAZ injectors or is there something more appropriate?
Not looking for much more than a healthy and noticeable increase in power, but not a rocket ship.

And  the engine has

Vmax = 3600

embosssed on cam-cover - what is a safe rpm for these engines, have seen it go round to 4200 occasionally in the gears!

Thanks

[turbotor]

I`m reving my AAZ to 5500......and have done the governour mod and a home made LDA pin, 15psi boost....410000 km on the clock, still going strong.

[HarryMann]

Thanks, good to know, in fact that cam cover says:-

Vmin 950
Vmax 3500