I'm putting my engine together from a variety of parts, and realized that I don't have a pulley that runs off the crankshaft for my 1.5/1.6 engine. It's a 1.5 crank in a 1.6TD block.
I have the correct water pump and pulley, but don't have the crank pulley.
Any help is appreciated.
Steve.
I have one but it has a balancer made on to it (TD model from 84 cy motor). I might have a standard but will have to look.
Added picture
Justice
.he needs a old style crank pully with real keyway.. do you have the keyway for the crank?
the only 1 i have is for a 1.6 longblock i have.. so not for sale.. but can get pic easy..
Ok, good luck with locating.
I think I found one
It's a stamped pulley that bolts to the cogged crank sprocket. There is a "dimple" on the back of the pulley which indexes with a "bump" on the sprocket.
Steve.
thats simple.. bbob owns it but got a non ac one right here.. ac has wider groove.. also have matching wp pully...