« previous next »
Pages: [1]

Author Topic: Balancing question  (Read 2385 times)

March 28, 2013, 11:50:25 am

Zukiman87

  • Junior
  • Offline
  • **
  • 65
Balancing question
« on: March 28, 2013, 11:50:25 am »
So I'm just swapping the 1.5 pistons and rods into my 1.6. I just weighed the pistons rods and pins all seperately. Pistons are 50.2 notched. Pins are exact same all 4. Rods vary .5 grams between lightest and heaviest. Everything is clean and no residue on them. You think they are balanced enough to put in and not worry about?
Logged
Reply #1March 28, 2013, 12:35:12 pm

RabbitJockey

  • Veteran
  • Offline
  • ***
  • 5104
  • Personal Text
    America, DUCK YEAH!!!
Re: Balancing question
« Reply #1 on: March 28, 2013, 12:35:12 pm »
did u weight big end and small end of the rods separately? u know you must also swap the crank shaft right?
Logged
01 Jetta TDI 100% stock daily
81 Rabbit:TDI-M ported head, Frank06 cam, PD intake, hybrid T3 turbo, Renault intercooler, Syl20 11mm pump, light weight fw, and yellow California Clutch clutch kit
Reply #2March 28, 2013, 01:36:08 pm

Zukiman87

  • Junior
  • Offline
  • **
  • 65
Re: Balancing question
« Reply #2 on: March 28, 2013, 01:36:08 pm »
Yes all the 1.5 guts are going into it
Logged
Reply #3March 28, 2013, 03:20:31 pm

Zukiman87

  • Junior
  • Offline
  • **
  • 65
Re: Balancing question
« Reply #3 on: March 28, 2013, 03:20:31 pm »
The rods and pistons are a matched set already from my mint 1.5 I had. I just re weighed the pistons after I notched them out.
Logged
Pages: [1]
« previous next »