Need a sanity check US to CE2 wiring - Troubleshooting - VWDiesel.net The IDI, TDI, and mTDI source.

• Need a sanity check US to CE2 wiring by jhax on 26 Mar, 2013 00:51
• Alright so I have my pin swapping charts done and I would like a sanity check just to make sure the car will start once im done swapping everything over. All US wiring has been acquired from http://www.autolib.diakom.ru/CAR/Volkswagen/1987/Golf/WIRING%20DIAGRAMS/ and all ce2 info comes from http://www.a2resource.com/electrical/CE2.html
  
  US Gauge cluster to CE2 plugs on back of fuse box
  
  
  US engine bay sensors etc to CE2 plugs on back of fuse panel
  
• #1 by CRSMP5 on 26 Mar, 2013 19:05
• for a mk2 golf?? id go find later 89-92 and just swap it all.. easier then splicing... but engine so on helps.. no cluewhat your trying to do or what too...
• #2 by jhax on 26 Mar, 2013 23:38
• nah ill stick with my traditional westy, Im in the process of building a monster tdi, I will swap the car to ce2 and once the engine is built i will swap the mk4 wiring harness to the CE2 system. No splicing here, pin swapping all the way. The diagrams above are the wires needed to swap the current engine and instrument panel into the CE2 fusebox.
• #3 by bbob203 on 27 Mar, 2013 08:41
• A2resource.com.       May help you.
• #4 by jhax on 27 Mar, 2013 12:55
• yes i have used that hence the link to a2 resource, i am looking for someone (preferably someone who has done this particular swap before) to double check the charts i made