Author Topic: 1.6NA crank and rods for TD build (Read 2347 times)

alex17young · « **on:** March 02, 2013, 07:40:59 pm »

Is there any disadvantage of running early 80's 1.6NA rods and a crank in my '91 1.6TD hydraulic block? Are rods are the same part number? I only need one pulley on the crank so the ole nose piece would work fine in my mind.

8v-of-fury · « **Reply #1 on:** March 02, 2013, 08:30:44 pm »

ETKA lists them as the same part number for early 80's CR diesels and the 91 ME/MF diesels.

alex17young · « **Reply #2 on:** March 02, 2013, 09:08:51 pm »

Thanks, good to know. I'll have to do some wrenching this week, might even call the machine shop!

MJF · « **Reply #3 on:** March 03, 2013, 03:58:24 am »

Even they are with same number, earlier NA rods are beefier than later TD rods.

alex17young · « **Reply #4 on:** March 03, 2013, 05:30:26 pm »

Really!? That's what I like to hear, thanks

ffgb · « **Reply #5 on:** March 03, 2013, 06:41:09 pm »

I think the rod bolts on the earlier 1.6N/A rods are reuseable and the later rod bolts are one time use stretch bolts? Correct me???

alex17young · « **Reply #6 on:** March 04, 2013, 08:55:58 am »

I think I've read that before too, Arp's are going into mine.

Author Topic: 1.6NA crank and rods for TD build (Read 2347 times)

alex17young

1.6NA crank and rods for TD build

8v-of-fury

Re: 1.6NA crank and rods for TD build

alex17young

Re: 1.6NA crank and rods for TD build

MJF

Re: 1.6NA crank and rods for TD build

alex17young

Re: 1.6NA crank and rods for TD build

ffgb

Re: 1.6NA crank and rods for TD build

alex17young

Re: 1.6NA crank and rods for TD build