have been working on it over the last few winters , drove it some last summer a bit, hope to do the finishing touches this winter. need to put my window tint on , rear bumper, got a rattel in the headliner to deal with and hope to decide on some type of stripe.
Super clean, round eyes, nice paint. A WINNER! Too bad you're so far I did window tinting for 12 years. Way easier to take the glass out to do it & turns out much better. I did my headliner when I did my paint & it wasn't that hard. Get your covering larger than you need & trim to fit at the end. Also easier to have the glass out. Glass is a snap to put back in. All you need is a 1/4" smooth nylon rope that's longer than the circumference of the window rubber. My rubbers were shot so I got new ones. They almost fell in. Helps to have a parner when you do it.
Now there's a color you don't see everyday. Nice with the Black accents. I did a headliner with the 3M spray on contact cement and liner material from JoAnns fabric. Comes in gray and brown I think. Very reasonable by the foot and I think it was 48 inches wide. More than enough if I remember for width. Has the spongy back on it.
I did the head liner when i was putting the truck together but moved the dome light to the back of the cab with a bigger light i belive the rattel is from one of the wire clips came loose and is banging up there. not a big deal just some time.