mk1 top alt belt idler

[madrogers]

 made this up while engine was out  gives a better wrap on the alt and takes the whip out , the idler is from the the old parts from my wifes tdi timing belt change.  got 1000k on it now seem ok.

[R.O.R-2.0]

bending a V-belt in that fashion will make the jugs rip off eventually..

v-belts are not made to be tensioned from the rear..

[madrogers]

i will see what happens, know my JD lawn mower deck has its belt bent over backwads like that for many years now (old Belt) , if the jugs start comeing off i will try a reg. belt ,this is the old belt what came w/the engine.

[R.O.R-2.0]

i will see what happens, know my JD lawn mower deck has its belt bent over backwads like that for many years now (old Belt) , if the jugs start comeing off i will try a reg. belt ,this is the old belt what came w/the engine.

lawn mower belts have no lugs, and are designed to be tensioned from the back side..

lawn mower belts are WAY different in design than automotive belts..

[madrogers]

i agree, they may be design differently or so "The Man" wants us to think, i will chuak this up to r@d project and see how long it lasts next step may be to get a mower belt to see what happens you never know untill you try .
its not a big deal to put a belt on if it comes off and alt lite will tell me when it comes off.
I do know that i dont hear that belt sqeal anymore 

[TylerDurden]

i agree, they may be design differently or so "The Man" wants us to think, i will chuak this up to r@d project and see how long it lasts next step may be to get a mower belt to see what happens you never know untill you try . its not a big deal to put a belt on if it comes off and alt lite will tell me when it comes off. I do know that i dont hear that belt sqeal anymore 

Right on.  I tried a few belts and a reverse-flex idler; but I took the setup off for a re-think, as the lugs were coming off in cold weather.

Keep spares and tools with you... and please keep us posted.  Thx.

[R.O.R-2.0]

ive used lawn mower belts on cars before without issue..

i WOULD NOT HESITATE to running a green belt on my car if i had a reverse tensioner setup..

[JamesT]

The spare belt I carry is an A34. It's a bit wider than the stock belt, but it has no lugs, and it was dirt cheap.

[madrogers]

Update ; still working fine , belt is holding up and the sqeal is gone, its been might cold up here in the begining of feb (-30 f )  all is good.