Want to borrow ;D Acme adaptor - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• Want to borrow ;D Acme adaptor by theman53 on 29 Jan, 2013 18:32
• I would like to see if someone has or could give me specs for an ACME or similar adaptor for the VW to the toyota R series trans bell housing or AX 15 Bell housing. I would like to make my own, but thicker. I have a start, but it would be tons better getting the adapter holes perfect so I can perfectly place the crank spacer and pilot bearing and I think it would be easier to do if the adapter is done first. I will do it with measuring if I have to, but if someone could help me out that would be great. If someone has an adaptor and can get the measurements I need I would love that. Let me know, please.
• #1 by theman53 on 30 Jan, 2013 20:00
• come on guys. Help me out.
• #2 by theman53 on 31 Jan, 2013 05:31
• I have tried, but honestly never looked at the pirate sites that game up. I have a bronco and went there a few times. Most on there are the lowest form of humans in the gene pool. Thanks I will get a look.
• #3 by theman53 on 31 Jan, 2013 05:36
• Found one on TDI club thanks.
• #4 by CdnVWJunkie on 31 Jan, 2013 11:11
• Quote from: theman53 on 31 Jan, 2013 05:31

  went there a few times. Most on there are the lowest form of humans in the gene pool.
  

  
  That's funny ***.   
• #5 by theman53 on 31 Jan, 2013 18:17
• You have been there I see. Guys with the welded shackle springs and CVs welded to driveshafts to make bends instead of building it right. I am telling you, they are Wal Mart greeters that give a bad name to Wal Mart greeters
• #6 by homerj1 on 01 Feb, 2013 02:17
• Quote from: theman53 on 31 Jan, 2013 05:36

  Found one on TDI club thanks.
  

  
  Could you please post the link?
  
  thanks
• #7 by theman53 on 01 Feb, 2013 04:51
• http://www.vwdiesel.net/forum/index.php?topic=31586.75
  bottom of my thread here is the pic and link to it