Want to borrow ;D Acme adaptor

[theman53]

I would like to see if someone has or could give me specs for an ACME or similar adaptor for the VW to the toyota R series trans bell housing or AX 15 Bell housing. I would like to make my own, but thicker. I have a start, but it would be tons better getting the adapter holes perfect so I can perfectly place the crank spacer and pilot bearing and I think it would be easier to do if the adapter is done first. I will do it with measuring if I have to, but if someone could help me out that would be great. If someone has an adaptor and can get the measurements I need I would love that. Let me know, please.

[theman53]

come on guys. Help me out.

[theman53]

I have tried, but honestly never looked at the pirate sites that game up. I have a bronco and went there a few times. Most on there are the lowest form of humans in the gene pool. Thanks I will get a look.

[theman53]

Found one on TDI club thanks.

[CdnVWJunkie]

went there a few times. Most on there are the lowest form of humans in the gene pool.

That's funny ***.   

[theman53]

You have been there I see. Guys with the welded shackle springs and CVs welded to driveshafts to make bends instead of building it right. I am telling you, they are Wal Mart greeters that give a bad name to Wal Mart greeters

[homerj1]

Found one on TDI club thanks.

Could you please post the link?

thanks

[theman53]

http://www.vwdiesel.net/forum/index.php?topic=31586.75
bottom of my thread here is the pic and link to it