None of the jobs are hard to do or beyond my ability. Going to try a few other things with the head but already have a Plan B in the mail thanks to this forum. For the re-bore I think it only takes a small plastic bottle, some emery cloth and oil. LOL. Remember that outcry?
lol ... and i`m sure it`d work fine for a few thousand miles.
Thanks for the shims!
Looks like i need a 0.80...time to break out the flat file i guess
No problem. In the past i`ve had luck using wet & dry sand paper on a granite surface plate. Shouldn't take too long.
Alternatively, if you can find a feeler gauge that thick you can trim it down to shim size and run with that.
I went deep into research a while back trying to figure out a way to manufacture these and valve shims in my little machine shop but turned out to be very difficult.
Topic: Feeler on Diesel Tools FS (Read 7254 times)
