Author Topic: 91 Jetta Eco Diesel..Which P/N for pump head o ring HELP  (Read 4419 times)

November 18, 2012, 07:17:47 pm

DAKOTAKIDD

  • Junior

  • Offline
  • **

  • 114
91 Jetta Eco Diesel..Which P/N for pump head o ring HELP
« on: November 18, 2012, 07:17:47 pm »
Hey guys...sorry for the cry out for help but tomorrow and Tuesday are my only 2 days to find parts and fix my leaking IP distribution block oring.  I have 2 different number--which is correct.

1900210154  or  2460210012

The first came from a previous thread I have going  http://www.vwdiesel.net/forum/index.php?topic=32412.0

The second is from this thread:  http://www.vwdiesel.net/forum/index.php?topic=30945.0

Help me if you can..

Thx
« Last Edit: November 18, 2012, 07:46:14 pm by DAKOTAKIDD »

Reply #1November 19, 2012, 03:03:10 am

TylerDurden

  • Veteran

  • Offline
  • ***

  • 1502
  • Personal Text
    I have a VW problem.
Re: 91 Jetta Eco Diesel..Which P/N for pump head o ring HELP
« Reply #1 on: November 19, 2012, 03:03:10 am »
I strongly suspect they are the same:

http://www.dieselstar.ro/catalogprod/design/pompe/documentatie/Categoria%204ok.pdf

"2460210012=1900210154=9924973"


http://www.t4forum.de/wbb3/index.php?page=Thread&threadID=75274 (German)


I am confident that 1900210154 is a good number, since is on the sheet I got from the pump-shop a few weeks ago.

Can u call your shop?

Reply #2November 19, 2012, 03:09:07 am

TylerDurden

  • Veteran

  • Offline
  • ***

  • 1502
  • Personal Text
    I have a VW problem.

Reply #3November 19, 2012, 06:16:05 pm

DAKOTAKIDD

  • Junior

  • Offline
  • **

  • 114
Re: 91 Jetta Eco Diesel..Which P/N for pump head o ring HELP
« Reply #3 on: November 19, 2012, 06:16:05 pm »
Both o rings are the same--I am attempting this job tomorrow so I will post back

Thx again

Cheers

Reply #4November 21, 2012, 11:30:40 am

DAKOTAKIDD

  • Junior

  • Offline
  • **

  • 114
Re: 91 Jetta Eco Diesel..Which P/N for pump head o ring HELP
« Reply #4 on: November 21, 2012, 11:30:40 am »
Hey,  I did the job yesterday and it went well.  I leaked checked it again this am and all is well..  My clunking was partially motor mount and which may have caused a broken exhaust hangar.

Thx for all the help..