« previous next »
Pages: [1]

Author Topic: 1.6 non AC setup  (Read 3148 times)

October 23, 2012, 05:09:16 pm

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 8999
  • Personal Text
    Bright, On
1.6 non AC setup
« on: October 23, 2012, 05:09:16 pm »
Pulled from a mk2, I'm fairly certain it will fit a Mk1 no problem. Alternator is tested and works, no bearing noises. I have the PS pump and can include that if needed. I have the belts as well and will include them. They are used. The harmonic balancer is showing signs of aging (rubber cracking). The tensioner is the toothed style to make adjusting the belt a lot easier. Note that the pulley bolts are included and in good shape. $75+ shipping for everything pictured (plus the belts).

http://smg.photobucket.com/albums/v603/burnyourmoney/?action=view&current=IMG_0013.jpg
Logged


Tyler
Reply #1October 24, 2012, 10:41:17 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1239
Re: 1.6 non AC setup
« Reply #1 on: October 24, 2012, 10:41:17 pm »
Pm'ing you with some questions.
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #2October 25, 2012, 09:46:32 pm

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 8999
  • Personal Text
    Bright, On
Re: 1.6 non AC setup
« Reply #2 on: October 25, 2012, 09:46:32 pm »
Pulleys are sold. I only have the alternator. I swapped on a different pulley that is the correct offset (+/- 3mm) $40 +shipping.
Logged
Tyler
Pages: [1]
« previous next »
 

Fixmyvw.com