self adjusting to manual clutch cable. - General - VWDiesel.net The IDI, TDI, and mTDI source.

• self adjusting to manual clutch cable. by bbob203 on 06 Sep, 2012 05:35
• can I reuse the bushings and release arm anchor plate?
• #1 by theman53 on 06 Sep, 2012 05:55
• No they are torque to yeild pieces of sheet metal and rubber, one time use only...
  
  
  
  Did you really just ask this question?
• #2 by CRSMP5 on 06 Sep, 2012 06:58
• rubber piece in tranny different for the 2 sstyles... the rubber piece on arm where cable hold down goes can also be different... one is thicker/longer then the other..
• #3 by bbob203 on 06 Sep, 2012 08:29
• ok thanks. that's what I was looking for.
• #4 by R.O.R-2.0 on 06 Sep, 2012 09:22
• ive always re-used both pieces with no ill side effects..
• #5 by bbob203 on 06 Sep, 2012 09:40
• I got down to the garage and messed with a bit looks like it should work with the self adjusting bushings and anchor plate.
• #6 by R.O.R-2.0 on 06 Sep, 2012 09:42
• Quote from: bbob203 on 06 Sep, 2012 09:40

  I got down to the garage and messed with a bit looks like it should work with the self adjusting bushings and anchor plate.
  

  
  IT DOES!!
  
  trust me, ive done it.. took auto cable out, threw it away, and used manual..