« previous next »
Pages: [1]

Author Topic: con rod for my AAZ  (Read 3748 times)

September 03, 2012, 01:40:18 pm

paolomarks

  • Junior
  • Offline
  • **
  • 146
con rod for my AAZ
« on: September 03, 2012, 01:40:18 pm »
Hello out there,
Any one have a good con rod for my AAZ ?  Get me back on the road!  Also looking for .020 oversize piston rings for my AAZ as well. Thanks, Paolo
Logged
Reply #1September 04, 2012, 09:54:37 am

paolomarks

  • Junior
  • Offline
  • **
  • 146
Re: con rod for my AAZ
« Reply #1 on: September 04, 2012, 09:54:37 am »
Any one?  Thanks,, Paolo
Logged
Reply #2September 05, 2012, 04:36:41 pm

410

  • Veteran
  • Offline
  • ***
  • 581
Re: con rod for my AAZ
« Reply #2 on: September 05, 2012, 04:36:41 pm »
I have some aaz con rods.  Do you know the number on the bottom of the cap?
Logged
Toyota truck 4x4 with Mtdi, M-vnt gt1749va, 11mm pump, fmic, smog .216 nozzles.  Sold!
Working on 1993 4runner mtdi, gtb1756vk, 11mm pump, smog .216 nozzles, custom 1" thick adaptor plate, pd150 intake manifold.
Reply #3September 05, 2012, 06:51:54 pm

libbydiesel

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 3399
Re: con rod for my AAZ
« Reply #3 on: September 05, 2012, 06:51:54 pm »
Yeah, they are sized to set similar deck heights.  You either need to match the bottom cap number or swap all four.
Logged
Reply #4September 06, 2012, 06:14:05 am

410

  • Veteran
  • Offline
  • ***
  • 581
Re: con rod for my AAZ
« Reply #4 on: September 06, 2012, 06:14:05 am »
Paolo, if you have the number on the bottom of the cap I can check to see if I have a matching rod for you.  Feel free to PM me.
Logged
Toyota truck 4x4 with Mtdi, M-vnt gt1749va, 11mm pump, fmic, smog .216 nozzles.  Sold!
Working on 1993 4runner mtdi, gtb1756vk, 11mm pump, smog .216 nozzles, custom 1" thick adaptor plate, pd150 intake manifold.
Reply #5September 06, 2012, 04:59:49 pm

Smokey Eddy

  • Veteran
  • Offline
  • ***
  • 3468
    • McScrubbins Body Wash
Re: con rod for my AAZ
« Reply #5 on: September 06, 2012, 04:59:49 pm »
I have a complete bottom end (in good shape) that would otherwise go to scrap. If you PM me quickly we can figure something out. Must be before the 14th of September.
Logged
Ed
Blacked out mk2 AAZ Jetta RIP. You are missed.
White 1999.5 ALH Golf 2dr. Low & wide. Rammed off the road RIP.
Blue 2009 CR140 Jetta CBEA/CJAA. Malone stage 2. EGR/DPF/Exhaust-valve deletes. 2.5" open exhaust. ADP Turbo swap. 1-stage nitrous kit. THROWN ROD
Pages: [1]
« previous next »