aftermarket gauge sensor questions - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• aftermarket gauge sensor questions by gitkrunk on 02 Aug, 2012 14:07
• Hello again. Just wondering where the best place to install my oil temp oil pressure boost and egt  sensors would be on the 1.6 turbo diesel
• #1 by Syncroincity on 02 Aug, 2012 21:25
• Here's my oil temp and pressure senders (Glowshift) in my oil filter flange. (AAZ)
  I have the EGT mounted in the block-off plate of the EGR valve on the manifold... I also see lots of them plugged into the bottom of the mani right under the turbo inlet. Remove the stud and drill/tap the hole.
  
  
  
• #2 by gitkrunk on 02 Aug, 2012 23:58
• cool! yeah i got the 1.6 so only one sensor hole on filter flange. i think im gonna mount the pressure there. and find one of those oil drain plug with the hole for the temp sensor
• #3 by vwsb1974 on 03 Aug, 2012 06:36
• i used this kit it worked good and was very compleat even came with the ground wire and conectors.
  http://store.42draftdesigns.com/VW-Oil-Pressure-Relocation-Kit_p_314.html