aftermarket gauge sensor questions

[gitkrunk]

Hello again. Just wondering where the best place to install my oil temp oil pressure boost and egt  sensors would be on the 1.6 turbo diesel

[Syncroincity]

Here's my oil temp and pressure senders (Glowshift) in my oil filter flange. (AAZ)
I have the EGT mounted in the block-off plate of the EGR valve on the manifold... I also see lots of them plugged into the bottom of the mani right under the turbo inlet. Remove the stud and drill/tap the hole.

[gitkrunk]

cool! yeah i got the 1.6 so only one sensor hole on filter flange. i think im gonna mount the pressure there. and find one of those oil drain plug with the hole for the temp sensor

[vwsb1974]

i used this kit it worked good and was very compleat even came with the ground wire and conectors.
http://store.42draftdesigns.com/VW-Oil-Pressure-Relocation-Kit_p_314.html