These parts are from an AAZ, canadian 1.9 VW non-TDI turbodiesel engine. I purchased the motor and parts with intent to assemble a stock motor, but the block had to be bored 0.5mm over, so decided to rebuild with bigger power goals in mind.
AAZ manifold: Intake
SOLD. Exhaust
SOLDThe Turbo:
SOLDFinally the AAZ pistons: No rings or pins, just the pistons. Standard piston bore sizing of 79.48mm. Cleaned soot and oil off. Slight vertical wear marks on skirts but no loss of diameter as result. Some small scratches on first land as result of ring removal, but can be deburred with steel wool. This engine had about 270K miles, and it's crank timing belt sprocket was slightly loose, causing light valve marks in the pistons w/ depressions of no more than 0.9mm in pitted area on #1 intake valve area of contact. Obviously they're not perfect, but they are serviceable; just don't run under excessive boost/fueling.
These parts are off of a 1.6 NA diesel motor from an '81 Rabbit that is being replaced due to a cracked block.
1.6 NA diesel manifold: Cleaned inner filter box and intake runners of oil inside and out. Includes plastic filter box cover. Sorry but no intake snorkel, as that got misplaced. If I find it and it is sold already, I'll PM OB and send for no expense.
1.6NA diesel injector lines:
SOLDPrice: $ [60/piston set (prices OBO, very negotiable on pistons due to wear), 35 NA manifold assy.] + shipping. I'm quite flexible on stuff, so if you think I'm asking a little too much or need a part badly just let me know and we can surely work something out. You guys are my diesel bros; I'll help any way I can.
Pictures:
AAZ intake SOLD
AAZ exhaust SOLD
K03 turbo SOLD
AAZ pistons
1.6NA intake
1.6NA injector lines SOLD
As stated, prices are OBO.
Thanks for reading, and have a nice day!