WTB - single round, or dual round front clip for a mk2. - page 1 - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTB - single round, or dual round front clip for a mk2. by R.O.R-2.0 on 14 Jan, 2012 14:43
• like title states, i want rounds..
  
  let me know what ya got..
• #1 by theman53 on 14 Jan, 2012 16:15
• I am not trying to rain on your parade and really do hope you find them. BUT I looked here, vortex, and everyother site I could think of and could not find any that were better than what the importers have. I had 80.00 shipping in one given to me that I had to cut and weld. If I had to do it over again it would have been cheaper to buy the one on this page...I don't like BFI, but they have them too.
  
  http://store.concept1.ca/store/category/4/6/Water-Cooled/MK2/page2.html
  
  I got the grill off ebay for 38.00.
• #2 by R.O.R-2.0 on 14 Jan, 2012 16:27
• i actually found a few grills on craigslist, believe it or not.. and relatively cheap also..
  
  just never found the core support to match yet.
  
  i will come up with something. if i have to buy new, so be it..
• #3 by CRSMP5 on 14 Jan, 2012 20:34
• you need 85/86 golf one.. 200mm squares..... rounds played and stock well stock...
• #4 by 8v-of-fury on 14 Jan, 2012 20:51
• Quote from: CRSMP5 on 14 Jan, 2012 20:34

  you need 85/86 golf one.. 200mm squares..... rounds played and stock well stock...
  

  
  That'd look bomb kevo.
  
  I'd love to do the single square rabbit setup on my 84 jetta
  
• #5 by CRSMP5 on 14 Jan, 2012 21:09
• not mk1 jetta... LOL... mk2.. LOL... like your ol lady's jetta.. imagine with a pair of 200mm squares..
  
  mk1 jetta = euro jetta for big squares.. else you loose the lower front panel built in squareness for crappy bunny roundness... even though ive wondered what it would be like to bond a early westy square set up with lower jetta squareness...
• #6 by 8v-of-fury on 14 Jan, 2012 21:19
• The 200mm sqaures. Yes like found on the Westmoreland rabbits, and early mk2 stuff eh?
  
  I want these! On my 84 jetta! LOL.
  
  
  
  
• #7 by theman53 on 15 Jan, 2012 07:39
• I cut up a westy 200mm square to put my rounds in. I have always seemed to get more light out of a round. I like the looks of them too. I think everything available is better than the aero setup.
• #8 by lovinthedeez on 15 Jan, 2012 08:13
• can't believe you can't find one over in ptown or up north.  I'll keep my eyes out down here.  Thought you were kidding before  And yes, mk2's look better with rounds i thinkey.
  
  
  
• #9 by R.O.R-2.0 on 15 Jan, 2012 11:26
• Quote from: CRSMP5 on 14 Jan, 2012 21:09

  not mk1 jetta... LOL... mk2.. LOL... like your ol lady's jetta.. imagine with a pair of 200mm squares..
  
  mk1 jetta = euro jetta for big squares.. else you loose the lower front panel built in squareness for crappy bunny roundness... even though ive wondered what it would be like to bond a early westy square set up with lower jetta squareness...
  

  
  um... your joking right?
  
  i would never even consider a westy front clip on my 92..
  
  i dont even like the way they look on an early mk2 with small bumpers..
  
  and i dont really like big bumpers, like small bumpers..
  
  i want ROUND HEADLIGHTS. ive wanted them since i saw my first old rabbit..
  
  nothing is going to change my mind. i want rounds, im getting rounds.
  
  thanks for the suggestion, but i DONT like those lights. i like the fact that you can get nice aftermarket light housings for them, but so can you for the 7" round lights..
  
  for me, theres only 2 options, aero, or round..
  
  thanks for all your suggestions, but im going round.. most likely duals..
• #10 by ORCoaster on 15 Jan, 2012 20:02
• Half way down the page of pictures.  Is this what you are looking for?
  
  http://portland.craigslist.org/wsc/pts/2801732095.html
  
  Just saw it a bit ago. 
  
  Good Luck.  DAS
• #11 by R.O.R-2.0 on 16 Jan, 2012 10:48
• Quote from: ORCoaster on 15 Jan, 2012 20:02

  Half way down the page of pictures.  Is this what you are looking for?
  
  http://portland.craigslist.org/wsc/pts/2801732095.html
  
  Just saw it a bit ago. 
  
  Good Luck.  DAS
  

  
  no.. rabbit parts are specific to mk1 cars.
  
  i have a 92 jetta now. its a mk2. nothing mk1 fits besides the engine..
  
  i need a grill for an 85-92 mk2 VW..
  
  there is a BIG DIFFERENCE between mk1, and mk2 cars.. they may be shaped similarly, but there WAY DIFFERENT..
• #12 by e30vr6 on 16 Jan, 2012 11:56
• you can buy it new from BFI. i found mine localy for around $40
  
  http://store.blackforestindustries.com/mk2sirorasu.html
• #13 by R.O.R-2.0 on 16 Jan, 2012 12:49
• Quote from: e30vr6 on 16 Jan, 2012 11:56

  you can buy it new from BFI. i found mine localy for around $40
  
  http://store.blackforestindustries.com/mk2sirorasu.html
  

  
  if i cant find a setup reasonably priced, im going to buy brand new..
• #14 by 8v-of-fury on 16 Jan, 2012 17:40
• Quote from: R.O.R-2.0 on 16 Jan, 2012 10:48

  nothing mk1 fits besides the engine.. there is a BIG DIFFERENCE between mk1, and mk2 cars.. they may be shaped similarly, but there WAY DIFFERENT..
  

  
  front seats, steering wheels, shifter knobs, window cranks, door handles, rear spindles drums and pads, front calipers, windshield wipers, light bulbs in the taillights..
  
  haha, just kidding KEVO!
  
  An mk2, wouldnt look to good westy your right, but an mk1 jetta does Oooh damn does it ever.
  
  
  
  
  
  He eventually got it up to 430whp