-
Fs: stock mk3 tdi Sidemount intercooler+piping
by
gtidiesel1.6
on 03 Jan, 2012 12:57
-
I have a stock mk3 side mount intercooler with the ducting.
It comes with the stock pipes and couplers
$80 shipped, pics avalible by request.
-
#1
by
dieselweasel
on 07 Jan, 2012 06:59
-
I'm interested if you still have this.
-
#2
by
gtidiesel1.6
on 08 Jan, 2012 21:49
-
Sure do!
-
#3
by
dieselweasel
on 11 Jan, 2012 03:25
-
PM sent
-
#4
by
gtidiesel1.6
on 18 Jan, 2012 08:35
-
-
#5
by
R.O.R-2.0
on 18 Jan, 2012 19:41
-
think this could be fitted to a mk2 car fairly easy?
-
#6
by
8v-of-fury
on 18 Jan, 2012 20:13
-
very easily Kev, they are pretty much the same under the hood with placement of stuff. You may have to cut the tubes short for where they go under the battery and run your own rubber hose to the inter cooler.. but it would fit pretty good id think.
-
#7
by
R.O.R-2.0
on 18 Jan, 2012 20:30
-
very easily Kev, they are pretty much the same under the hood with placement of stuff. You may have to cut the tubes short for where they go under the battery and run your own rubber hose to the inter cooler.. but it would fit pretty good id think.
where does it actually mount up?
and how much boost will a stock core hold, before the plastic tanks blow off?
TDIs run a considerable amount of boost dont they? north of 20psi?
-
#8
by
8v-of-fury
on 18 Jan, 2012 20:34
-
It mounts in front of the driver tire. Side mount intercooler.
this is an AHU ic setup, drivers side determines it. ALH had it on the passenger.
AHU's run 12-14psi stock from their k03's
-
#9
by
R.O.R-2.0
on 18 Jan, 2012 20:58
-
It mounts in front of the driver tire. Side mount intercooler.
this is an AHU ic setup, drivers side determines it. ALH had it on the passenger.
AHU's run 12-14psi stock from their k03's
think i would explode it with my VNT?
-
#10
by
8v-of-fury
on 18 Jan, 2012 20:59
-
people run 18-20 psi out of a k03.. but you run like high 20's no?
-
#11
by
R.O.R-2.0
on 18 Jan, 2012 21:11
-
people run 18-20 psi out of a k03.. but you run like high 20's no?
mid-high 20s..
-
#12
by
CRSMP5
on 18 Jan, 2012 22:15
-
not to kill a sale here... but fitting to a mk2... way more work... the first tdi conversion i did was in a mk2... unless you got big bumpers.. not happening... and the batt needs changed.. i used the mk3 mount and moved it sideways but it will not in no way fit under the fender.. gotta cut it and use the big bumper to hide it away..
-
#13
by
gtidiesel1.6
on 18 Jan, 2012 22:39
-
Thanks for all the replies/info people.
I had it in a mk1 with a slight scoop in the hood and placed the cooler where the battery was(even before the scoop my intake temps went down and aswell with egt)
Friend of mine also has the same cooler/pipes and a few aftermarket couplers to stick it into the driver side fender well(plastic liner was cut up a little to make it fit) on his mk2 jetta
-
#14
by
R.O.R-2.0
on 19 Jan, 2012 16:51
-
not to kill a sale here... but fitting to a mk2... way more work... the first tdi conversion i did was in a mk2... unless you got big bumpers.. not happening... and the batt needs changed.. i used the mk3 mount and moved it sideways but it will not in no way fit under the fender.. gotta cut it and use the big bumper to hide it away..
i got big bumpers, but im not liking what your saying.. its not gonna look like its supposed to be there, is it?
