WTB - K03 Oil Feed and Return Line and Red Oil Funnel

[wpinnix]

Hello,

I need some good condition Oil feed and return lines for a 1996 AAZ with a K03.

I'm also looking for a red oil funnel.......those orange ones are the right height but my dipstick is too tight in it.

Please e-mail me price plus shipping to 95501: [email protected]

Thank you,
Bill

[ilikevwdiesel]

email sent  

hmmm...I wonder if a K03 return line will work on a K24 or T3 on an AAZ? anyone?

[R.O.R-2.0]

email sent  

hmmm...I wonder if a K03 return line will work on a K24 or T3 on an AAZ? anyone?

K03 has a pretty tiny outlet flange. its worth a shot, but i think the only way it would work is with adapters of some sort.

you could build a 16mm spacer for the T3 line and run it?

i believe the only reason that the return lines dont fit is the block height, so if you made a 16mm spacer, and used longer bolts and a gasket on each side of the spacer, then i dont see you having any issues..

[ilikevwdiesel]

[R.O.R-2.0]

yea, looks like just like what i suspected..

looks like the spread between the bolt holes is about +1/2 inch on the T3 line..

i think the T2, and K03 have similarly sized return line flanges..

[ilikevwdiesel]

http://www.ebay.com/itm/TURBO-BRAIDED-OIL-DRAIN-RETURN-LINE-K26-K24-K03-K04-/170560819392